Abstract:Fiber sizing is one of the most important components in manufacturing composites by affecting mechanical properties, including strength and stiffness. The sizing of manmade fibers offers many advantages, such as improving fiber/matrix adhesion and bonding properties, protecting fiber surfaces from damage during the processing and weaving stages, and enhancing the surface wettability of polymer matrices. In this work, the influence of fiber sizing levels on carbon fibers' (CFs) mechanical properties is reported at room temperature using single fiber tensile testing (Favimat+), single fiber pullout testing (SFPO), and interfacial elemental analysis by X-ray photoelectron spectroscopy (XPS). Standard modulus CFs (7 ± 0.2 μm in diameter) were sized using two commercially available Michelman sizing formulations. The average solid content for each sizing formulation was 26.3 ± 0.2% and 34.1 ± 0.2%, respectively. HEXION RIMR 135 with curing agent RIMH 137 was used as a model thermoset epoxy matrix during SFPO measurements. A predictive engineering fiber sizing methodology was also developed. Sizing amounts of 0.5, 1, and 2 wt.% on the fiber surface were achieved for both sizing formulations. For each fiber size level, 50 single-fiber tensile testing experiments and 20 single-fiber pull-out tests were conducted. The ultimate tensile strength (σult) of the carbon fibers and the interfacial shear strength (τapp) of the single fiber composite were analyzed. The sizing levels' effect on interfacial shear stress and the O/C (Oxygen/Carbon) surface composition ratio was investigated. Based on our experimental findings, an increase of 6% in fiber performance was recorded for ultimate tensile and interfacial shear strengths. As a result, generalized fiber sizing and characterization methods were established. These developed methods can be used to characterize the strength and interfacial shear strength of manmade fibers with different sizing formulations and solid contents irrespective of the matrix, i.e., thermoset or thermoplastic.

The influence of sizing treatment on the mechanical and morphological properties of carbon fiber reinforced polyphenylene sulfide composites

Effect of polyphenylene sulfide sulfone sizing agent on interfacial, thermal, and mechanical properties of carbon fiber

Effect of polyetherimide sizing on surface properties of carbon fiber and interfacial strength of carbon fiber/polyetheretherketone composites

Effect of carbon fiber surface properties on carbon fiber/polyphenylene sulfide composite interfacial property

Cyclic (phenylene sulfide) treated carbon fiber for facile preparation of high performance PEEK based anti-wear composites

Effects of polyetherimide sizing involving carbon nanotubes on interfacial performance of carbon fiber/polyetheretherketone composites

Phthalocyanine-terminated poly(aryl ether) sizing: An efficient strategy in interfacial interactions optimization of CF/PPESK composites with excellent thermal-resistant

Investigation of sizing materials for carbon fiber reinforced thermoplastic composites

Preparation of CF/PEEK Composites with High Mechanical Performance Using PEEK Derivatives as the Sizing Agent

Effect of Fiber Sizing Levels on the Mechanical Properties of Carbon Fiber-Reinforced Thermoset Composites

Effect of Sizing Agents on Surface Properties of Carbon Fibers and Interfacial Adhesion of Carbon Fiber/Bismaleimide Composites

Enhancement of interfacial properties of carbon fiber reinforced polyphenylene sulfide resin by sulfur treatment

Effects of multi-walled carbon nanotube/graphene oxide-based sizing on interfacial and tribological properties of continuous carbon fiber/poly(ether ether ketone) composites

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Research progress in carbon fiber sizing agents for PEEK composites

Effect of Carbon Nanotube on Thermal, Tribological and Mechanical Properties of 3D Printing Polyphenylene Sulfide

Effect of carbon nanotube addition in two sizing agents on interfacial properties of carbon fiber / polycarbonate composites

Effect of de-sizing on the structural and mechanical properties of carbon fiber reinforced polypropylene composites molded by the novel direct fiber feeding injection molding technology

A novel waterborne g‐CPP sizing agent for the interfacial enhancement of SCF / PP composites

Soluble semi-aliphatic polyimide sizing in CF/PEI composites for improving mechanical performance and hydrothermal aging resistance

Environmentally Friendly Sizing Strategy for PBO Fiber-reinforced Composites Through Building Carbon Nanosphere Coatings