Effect of polyetherimide sizing on surface properties of carbon fiber and interfacial strength of carbon fiber/polyetheretherketone composites

Hansong Liu,Yan Zhao,Na Li,Shuang Li,Xuekuan Li,Zhiwei Liu,Sheng Cheng,Kai Wang,Shanyi Du

DOI: https://doi.org/10.1002/pc.25876

IF: 5.2

2020-11-15

Polymer Composites

Abstract:<p>The sizing process is almost invariably performed after the manufacture of carbon fiber (CF) and the sizing agent takes the effect of protecting CF surface. However, the traditional sizing agent is not suitable for processing continuous CF reinforced thermoplastic composites (CFRTPs) with high processing temperature. In this work, polyetherimide (PEI) is chosen as the sizing agent for CF reinforced polyetheretherketone (CF/PEEK) composites, and the sizing content as well as the type of sizing agent (including solvent‐based and emulsion type) were systematically researched. After a series of characterization of CF surface properties and interfacial strength of CF/PEEK, the improvement of interfacial shear strength (IFSS) and mechanical performances of sized CF/PEEK proves the enhancement of interfacial adhesion after sizing. CF/PEEK composites which contain CF handled by emulsion type sizing agent have good mechanical properties, indicating that it has the potential to replace solvent‐based sizing agent. Besides, the miscible feature of PEEK with PEI, the raise of CF surface roughness and surface energy might cause the reinforcement of interfacial mechanical properties. This research may create a potential way for CF production field, aiming at improving the interfacial performance of CFRTPs.</p>

materials science, composites,polymer science