Abstract:In order to solve the problem of poor interfacial bonding between the smooth and inert basalt fibers (BFs) and the polyamide 6 (PA6) matrix, carboxylated carbon nanotubes (CNTs) were modified onto the surface of BFs using a simple, environmentally friendly, continuously processable, and non-damaging fiber skeleton sizing method via water-soluble polyurethane dispersion. It was found that the highly chemically active carboxylated CNTs were uniformly dispersed on the surface of BFs with adjustable surface roughness and wettability. With enhanced interfacial bonding effect between the BFs and PA6 matrix by surface sizing of 1.5 g/L CNTs, the tensile strength and tensile modulus of the BF-reinforced composites were improved by about 17.5% and 32.6%, and the flexural strength and flexural modulus increased by about 36.0% and 62.5%, with a higher storage modulus and lower loss factor. With the sizing modification of CNTs, the friction and wear reduction properties of the BF-reinforced PA6 composites were also enhanced, and the wear resistance improvement was up to 40.5%. The introduction of CNTs could make a tight bond between the BFs and PA6 matrix to bear frictional shear damage and produce small size abrasive chips. The CNT sizing–modified BF-reinforced PA6 composites presented shallow and narrow 3D wear surface with low surface roughness parameters. The roughened and activated BFs may form a mechanically engaging interface with the polymer matrix molecular chain segments, which could bear more shear damage and relieve the fatigue wear and adhesive wear for the CNT sizing–modified BF-reinforced composites. The above simple and effective strategies and research laws for enhancing interfacial bonding could promote wider applications of BF-reinforced polymer composites in lightweight and high strength, friction and wear reduction, and high temperature resistance.

Effect of carbon nanotube addition in two sizing agents on interfacial properties of carbon fiber / polycarbonate composites

Reducing Dispersity of Mechanical Properties of Carbon Fiber/epoxy Composites by Introducing Multi-Walled Carbon Nanotubes

Nanocomposites of Poly(vinylidene Fluoride) with Multiwalled Carbon Nanotubes

Effects of carbon nanotube length on interfacial properties of carbon fiber reinforced thermoplastic composites

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

The effect of carbon nanotubes wrapping conformation on the interfacial properties of carbon fiber

Interfacial Improvement of Carbon Fiber/epoxy Composites Using a Simple Process for Depositing Commercially Functionalized Carbon Nanotubes on the Fibers

Effects of polyetherimide sizing involving carbon nanotubes on interfacial performance of carbon fiber/polyetheretherketone composites

Multiscale interfacial enhancement of surface grown carbon nanotubes carbon fiber composites

Interfacial modification of carbon fiber by carbon nanotube gas-phase dispersion

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

Surface sizing introducing carbon nanotubes for interfacial bond strengthening of basalt fiber–reinforced polymer composites

The influence of sizing treatment on the mechanical and morphological properties of carbon fiber reinforced polyphenylene sulfide composites

Preparation of CNTs/SCF reinforcement using multiple continuous surface treatments to achieve synergistic improvement of epoxy resin-based composites interfacial properties: Towards industrial production of carbon fiber surface treatment

The effect of CNT grafting on the mechanical properties of the UHMWPE fiber/HDPE composite

Effects of polyurethane/functionalised carbon nanotube interfacial interactions on tensile and compressive properties – molecular dynamics simulations

Effects of multi-walled carbon nanotube/graphene oxide-based sizing on interfacial and tribological properties of continuous carbon fiber/poly(ether ether ketone) composites

Effect of Sizing Agents on Surface Properties of Carbon Fibers and Interfacial Adhesion of Carbon Fiber/Bismaleimide Composites