Abstract:In order to solve the problem of poor interfacial bonding between the smooth and inert basalt fibers (BFs) and the polyamide 6 (PA6) matrix, carboxylated carbon nanotubes (CNTs) were modified onto the surface of BFs using a simple, environmentally friendly, continuously processable, and non-damaging fiber skeleton sizing method via water-soluble polyurethane dispersion. It was found that the highly chemically active carboxylated CNTs were uniformly dispersed on the surface of BFs with adjustable surface roughness and wettability. With enhanced interfacial bonding effect between the BFs and PA6 matrix by surface sizing of 1.5 g/L CNTs, the tensile strength and tensile modulus of the BF-reinforced composites were improved by about 17.5% and 32.6%, and the flexural strength and flexural modulus increased by about 36.0% and 62.5%, with a higher storage modulus and lower loss factor. With the sizing modification of CNTs, the friction and wear reduction properties of the BF-reinforced PA6 composites were also enhanced, and the wear resistance improvement was up to 40.5%. The introduction of CNTs could make a tight bond between the BFs and PA6 matrix to bear frictional shear damage and produce small size abrasive chips. The CNT sizing–modified BF-reinforced PA6 composites presented shallow and narrow 3D wear surface with low surface roughness parameters. The roughened and activated BFs may form a mechanically engaging interface with the polymer matrix molecular chain segments, which could bear more shear damage and relieve the fatigue wear and adhesive wear for the CNT sizing–modified BF-reinforced composites. The above simple and effective strategies and research laws for enhancing interfacial bonding could promote wider applications of BF-reinforced polymer composites in lightweight and high strength, friction and wear reduction, and high temperature resistance.

Surface sizing introducing carbon nanotubes for interfacial bond strengthening of basalt fiber–reinforced polymer composites

Excellent and effective interfacial transition layer with an organic/inorganic hybrid carbon nanotube network structure for basalt fiber reinforced high-performance thermoplastic composites

Dramatic mechanical increments of basalt fiber/phthalonitrile (BF/PN) composites by constructing a unique micro/nano hybrid interface

Construction of 3D nanostructures on carbon fiber surfaces by sizing for preparing high‐performance composites

Effect of fiber surface treatment with silane coupling agents and carbon nanotubes on mechanical properties of carbon fiber reinforced polyamide 6 composites

Highly Enhancing the Interfacial and Mechanical Properties of Basalt Fiber/Poly(phthalazinone ether nitrile ketone) Composite by Thermoplastic Sizing Agents with Different Structures

Surface Modification of Basalt Fibers with Improved Reactivity, Thermal Stability, and Tensile Strength

Surface modification of basalt fiber using to reinforce polycarbonate composites and its mechanical performance

Enhanced Interfacial Bonding of AF/PEEK Composite Based on CNT/aramid Nanofiber Multiscale Flexible-Rigid Structure

Improvement of Interfacial Interactions in CF/PEEK Composites by an S-Psf/graphene Oxide Compound Sizing Agent

Interface Enhancement of Carbon Fiber Reinforced Methylphenylsilicone Resin Composites Modified with Silanized Carbon Nanotubes

Improving Interfacial Interactions of CF/PEEK Composites with Sulfonated Polyether Sulfone

Interfacial modification to improve the mechanical performance of basalt fiber/epoxy 3D woven composites

Enhancing Fiber-Matrix Interface in Carbon Fiber/poly Ether Ether Ketone (CF/PEEK) Composites by Carbon Nanotube Reinforcement of Crystalline PEEK Sizing

Interface Enhancement of Carbon Fiber Reinforced Unsaturated Polyester Composites with Sizing Agent Containing Carbon Nanotubes

Interfacial Improvement of Carbon Fiber-Reinforced Methylphenylsilicone Resin Composites with Sizing Agent Containing Functionalized Carbon Nanotubes

Mechanical and tribological properties of basalt fiber fabric reinforced polyamide 6 composite laminates with interfacial enhancement by electrostatic self-assembly of graphene oxide

Effect of carbon nanotube addition in two sizing agents on interfacial properties of carbon fiber / polycarbonate composites

Remarkable Improvement in Interfacial Shear Strength of Carbon Fiber/epoxy Composite by Large‐scare Sizing with Epoxy Sizing Agent Containing Amine‐treated MWCNTs

Surface Microstructure of Basalt Fiber after Surface Modification and Mechanical Properties of Concrete Reinforced with Modified Basalt Fiber

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites