Abstract:This work presents research results concerning to the fabrication of hybrid solar cells in a superstrate configuration with the following structure: glass/SnO 2 :F/ZnO + CdS/CdTe + CdCl 2 -TT/PEDOT:PSS-TT/Cu-Mo. After Cadmium Telluride (CdTe) absorber layer processing, the organic conjugated polymer Poly(3,4-ethylenedioxythiophene): poly(styrene sulphonate) (PEDOT:PSS) was deposited with a thickness around 50 nm, then a thermal annealing (TA) was carried out varying annealing time (20-40 min) and temperature (80-120 °C). The physical properties and output electrical parameters of the devices were measured and compared with a reference solar cells without TA. A decrease of the resistivity values was reached as a result of the incorporation of PEDOT:PSS on CdTe as a hole transport layer. CdTe/PEDOT:PSS structure was characterized by profilometry, four-probe method, UV–Vis spectroscopy, Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and Raman spectroscopy. The electrical performance of the fabricated hybrid solar cells was analysed through the current density vs. voltage (J vs. V) characteristic, External Quantum Efficiency (EQE) measurements and the values spread distribution for each electrical parameter was also discussed. A highest conversion efficiency around 15.2% was obtained for a device in which the TA was performed at 100 °C during 30 min with output electrical parameters values of V oc ~ 0.778 V, J sc ~ 34.0 mA/cm 2 , FF ~ 0.55 and EQE values above 55%, resulting this in an improvement of the use of PEDOT:PSS in hybrid solar cells. A monitoring of the degradation effect of the output electrical values was carried out after a period of 24 months and an average degradation rate around 20% was found, however for devices processed at higher temperatures of TA, degradation rate of the conversion efficiency was at least 3%.

Investigation of Annealing Effects on Microstructure of Hybrid Nanocrystal–polymer Solar Cells by Impedance Spectroscopy

Post-Fabrication Annealing Effects in Polymer-Nanotube Photovoltaic Cells

Inverted All-Polymer Solar Cells Based on a Quinoxaline–thiophene/naphthalene-Diimide Polymer Blend Improved by Annealing

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Nanoscale Structural and Electronic Evolution for Increased Efficiency in Polymer Solar Cells Monitored by Electric Scanning Probe Microscopy

Annealing Effect on Photovoltaic Performance of Hybrid P3ht/In-Situ Grown Cds Nanocrystal Solar Cells

The Effect of Annealing Treatment on Performance of Interdiffused Organic Photovoltaic Devices

Thermal Annealing Effect on Ultrafast Charge Transfer in All-Polymer Solar Cells with a Non-Fullerene Acceptor N2200

Annealing Effects on the Photovoltaic Performance of All-Conjugated Poly(3-Alkylthiophene) Diblock Copolymer-Based Bulk Heterojunction Solar Cells

Thermal Annealing Effect on Internal Electrical Polarization in Organic Solar Cells

Effect of the hydrogen annealing on the properties of Mo/CuIn1-xGaxSe2/CdS solar cells junction

Study of the effect of annealing process on the performance of P3HT/PCBM photovoltaic devices using scanning-probe microscopy

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT: PCBM-based organic solar cells

Correlating Nanoscale Morphology with Device Performance in Conventional and Inverted PffBT4T-20D:PC71 BM Polymer Solar Cells

The Effect of Thermal Annealing of Mo Film on the CuInSe2 Layer Texture and Device Performance

Effect of annealing copper phthalocyanine on the performance of interdigitated bulk-heterojunction organic photovoltaic cells

Annealing Effects on the Solution Processed CdTe Nanocrystals Solar Cells

Impedance Spectroscopy Investigation of Electron Transport in Solar Cells Based on Blend Film of Polymer and Nanocrystals

Investigation of the effects of thermal annealing to PEDOT:PSS on the photovoltaic response of hybrid solar cells

Effect of Crystalline Microstructure on the Photophysical Performance of Polymer/Perylene Composite Films