Abstract:This work presents research results concerning to the fabrication of hybrid solar cells in a superstrate configuration with the following structure: glass/SnO 2 :F/ZnO + CdS/CdTe + CdCl 2 -TT/PEDOT:PSS-TT/Cu-Mo. After Cadmium Telluride (CdTe) absorber layer processing, the organic conjugated polymer Poly(3,4-ethylenedioxythiophene): poly(styrene sulphonate) (PEDOT:PSS) was deposited with a thickness around 50 nm, then a thermal annealing (TA) was carried out varying annealing time (20-40 min) and temperature (80-120 °C). The physical properties and output electrical parameters of the devices were measured and compared with a reference solar cells without TA. A decrease of the resistivity values was reached as a result of the incorporation of PEDOT:PSS on CdTe as a hole transport layer. CdTe/PEDOT:PSS structure was characterized by profilometry, four-probe method, UV–Vis spectroscopy, Scanning Electron Microscope (SEM), Energy Dispersive Spectroscopy (EDS) and Raman spectroscopy. The electrical performance of the fabricated hybrid solar cells was analysed through the current density vs. voltage (J vs. V) characteristic, External Quantum Efficiency (EQE) measurements and the values spread distribution for each electrical parameter was also discussed. A highest conversion efficiency around 15.2% was obtained for a device in which the TA was performed at 100 °C during 30 min with output electrical parameters values of V oc ~ 0.778 V, J sc ~ 34.0 mA/cm 2 , FF ~ 0.55 and EQE values above 55%, resulting this in an improvement of the use of PEDOT:PSS in hybrid solar cells. A monitoring of the degradation effect of the output electrical values was carried out after a period of 24 months and an average degradation rate around 20% was found, however for devices processed at higher temperatures of TA, degradation rate of the conversion efficiency was at least 3%.

Thermal Annealing Effect on Ultrafast Charge Transfer in All-Polymer Solar Cells with a Non-Fullerene Acceptor N2200

Inverted All-Polymer Solar Cells Based on a Quinoxaline–thiophene/naphthalene-Diimide Polymer Blend Improved by Annealing

Post-Fabrication Annealing Effects in Polymer-Nanotube Photovoltaic Cells

Improved Charge Generation via Ultrafast Effective Hole‐Transfer in All‐Polymer Photovoltaic Blends with Large Highest Occupied Molecular Orbital (HOMO) Energy Offset and Proper Crystal Orientation

Dark and illuminated J(V) characteristics of thin layered bulk heterojunction P3HT:PCBM sandwich solar cells after thermal treatment

High Performance All-Polymer Solar Cells by Synergistic Effects of Fine-Tuned Crystallinity and Solvent Annealing.

Nanoscale Structural and Electronic Evolution for Increased Efficiency in Polymer Solar Cells Monitored by Electric Scanning Probe Microscopy

Effect of Two-Step Annealing on the Performance of Ternary Polymer Solar Cells Based on P3ht:Pc71bm:Sq

Enhancement Mechanisms of the Power Conversion Efficiency for the P3HT:PCBM Bulk Heterojunction Solar Cells with a LiF Cathode Buffer Layer Due to Thermal Annealing

Quantitative Nanoscale Monitoring the Effect of Annealing Process on the Morphology and Optical Properties of Poly(3-Hexylthiophene)/[6,6]-phenyl C61-butyric Acid Methyl Ester Thin Film Used in Photovoltaic Devices

Influence of thermal annealing on microstructure, energetic landscape and device performance of P3HT: PCBM-based organic solar cells

Annealing Effects on the Photovoltaic Performance of All-Conjugated Poly(3-Alkylthiophene) Diblock Copolymer-Based Bulk Heterojunction Solar Cells

Effect of Thermal Annealing on the Efficiency of Heterojunction Photovoltaic Cells Fabricated Using Poly(3-Hexylthiophene) and Methanofullerene, [6,6]-Phenyl C61-butyric Acid Methyl Ester.

Effects of Optical Interference and Annealing on the Performance of Poly (3-Hexylthiophene): Fullerene Based Solar Cells

Investigation of Annealing Effects on Microstructure of Hybrid Nanocrystal–polymer Solar Cells by Impedance Spectroscopy

Charge transport and extraction of PTB7:PC71BM organic solar cells: effect of film thickness and thermal-annealing

Annealing Effect on Photovoltaic Performance of Hybrid P3ht/In-Situ Grown Cds Nanocrystal Solar Cells

Effect of Thermal Annealing on the Performance of Ternary Organic Photovoltaics Based on PTB7:PC71BM:F8BT

High-performance All-Polymer Solar Cells Based on Fluorinated Naphthalene Diimide Acceptor Polymers with Fine-Tuned Crystallinity and Enhanced Dielectric Constants

Annealed Treatment Effect in Poly(3-hexylthiophene):Methanofullerene Solar Cells

Investigation of the effects of thermal annealing to PEDOT:PSS on the photovoltaic response of hybrid solar cells