Abstract:The recovery of cathode materials using deep eutectic solvents (DESs) still requires a long leaching time and relatively high temperatures. The poor selectivity of the leaching process leads to the low purity of the precipitate. Herein, a microwave-assisted choline chlorine–oxalate–water system was designed to selectively leach Li and recover high-purity cobalt oxalate simultaneously, which could greatly shorten the extraction time and decrease the leaching temperature. Fourier transform infrared spectroscopy, X-ray diffraction, inductively coupled plasma–mass spectrometry, and X-ray photoelectron spectroscopy methods were used to explore the mechanism of microwave-assisted DES leaching of valuable metals from lithium cobalt oxide (LCO). It was found that 99.05% of Li could be selectively leached and 99.21% of Co could be precipitated as cobalt oxalate at 100 °C in 10 min simultaneously. The purity of cobalt oxalate precipitated was 95.36% without any purification procedures. A new polymer compound Co2+[(Ch+) x (Cl–) y (HC2O4 –) z ] was formed during the microwave-assisted leaching process. The compound could be hydrolyzed, and the cobalt oxalate precipitate appeared by increasing the water content in the DES. Finally, the DES for the recovery of LCO could be cycled four times with favorable selectivity. A low-pollution, efficient, process-simple, and precipitant-free technology using a microwave-assisted DES for selective recovery of LCO was proposed, which provided an important reference method for large-scale recovery of valuable metals from spent lithium-ion batteries.

Study of New Process for Recovery of Cobalt Oxide from Al-containing Cobalt Sulphate Solution

Study of Preparation of Cobalt Aluminate by Sol-Gel Process and Electroless Plating

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Advanced Purification Process for Cobalt Sulphate Solution

Recovery of Copper and Cobalt from Oxide Copper-cobalt Ore with Ammonium Chloride

Study on the Synthesis of LiCoO2 from Spent Li-Ion Batteries

A Novel Method for Synthesis of Co–Al Layered Double Hydroxides and Their Conversions to Mesoporous CoAl2O4 Nanostructures for Applications in Adsorption Removal of Fluoride Ions

Study on the Behavior of Electrochemical Extraction of Cobalt from Spent Lithium Cobalt Oxide Cathode Materials

Comprehensive Recovery of Ni-Co from Low Grade Manganese Oxide Ore

A Study of Recovery of Copper and Cobalt from Copper–cobalt Oxide Ores by Ammonium Salt Roasting

Recovering cobalt from cobalt oxide ore using suspension roasting and magnetic separation technique

Leaching cobalt from spent Li-ion battery by sulfuric acid-hydrogen peroxide

Recovery of high-purity metallic cobalt from lithium nickel manganese cobalt oxide (NMC)-type Li-ion battery

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

Recovering Lithium from the Cathode Active Material in Lithium-Ion Batteries via Thermal Decomposition

An Efficient and Precipitant-Free Approach to Selectively Recover Lithium Cobalt Oxide Made for Cathode Materials Using a Microwave-Assisted Deep Eutectic Solvent

Lithium and cobalt extraction from LiCoO2 assisted by p(VBPDA-co-FDA) copolymers in supercritical CO2

Recycling Technology for Co and Al from Spent Li-ion Batteries

Study on the preparation of battery grade cobalt carbonate from PTA oxidation residue

Study on the Preparation and Modification of LiNi0.6Co0.2Mn0.2O2 from Spent Lithium Ion Batteries As Lithium and Cobalt Source

Solid-state Synthesis of Cobalt Ferrite Fitted with Γ-Fe2o3-containing Nanocage for Peroxymonosulfate Activation and Cobalt Leaching Control