Abstract:In light of the ecological ramifications and material consumption stemming from exhausted lithium-ion batteries, an exigent requirement persists for efficient and expansible recycling techniques. Herein, we investigate an innovative expedited method to directly regenerate and enhance spent LiCoO2 (SLCO). The profoundly discharged SLCO powders, featuring an unimpaired crystal lattice, are isolated. These powders are then amalgamated with Li, Ni, and Mn precursors. Subsequent heating at elevated temperatures yields LNMO-SLCO, effecting the direct regeneration of LCO, accompanied by a synergistic re-lithiation process and the application of a LiNi0.5Mn1.5O4 (LNMO) coating, all achieved in a single step. The homogeneously thin spinel LNMO coating layer (10-15 nm) bestows upon LNMO-SLCO an enhanced cycling performance and charge-discharge rate capacity when benchmarked against SLCO and commercial LiCoO2 (CLCO). Evidently, at 0.1C, 0.5C, and 2C rates, LNMO-SLCO delivers discharge capacities of 214.4 mAh g  1, 187.4 mAh g  1, and 144.1 mAh g  1, respectively. Notably, it sustains 77.68 % of its original capacity following 100 cycles at 0.5 C. The merits of LNMO-SLCO are corroborated through cyclic voltammetry and electrochemical impedance spectroscopy, affirming its reduced charge transfer resistance and augmented lithium-ion solid phase diffusion coefficient. This endeavor stands as the foremost documented instance of a direct approach to SLCO reconstruction involving LNMO coating, culminating in the formation of LNMO-SLCO, characterized by sustained high-voltage cycling performance. The outlined re-lithiation and LNMO coating stratagem proffer valuable insights for the scalable, high-value recycling of SLCO, while remaining transposable to other spent cathode materials.

Study on the Synthesis of LiCoO2 from Spent Li-Ion Batteries

Synthesis and Electrochemical Performances of LiCoO 2 Recycled from the Incisors Bound of Li-ion Batteries

Preparation of LiCoO 2 Cathode Materials from Spent Lithium–ion Batteries

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Recycling Technology for Co and Al from Spent Li-ion Batteries

Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries

Direct recovery of LiCoO2 from the recycled lithium-ion batteries via structure restoration

Recycling lithium cobalt oxide from its spent batteries: An electrochemical approach combining extraction and synthesis

Recycling of LiCoO2 cathode material from spent lithium ion batteries by ultrasonic enhanced leaching and one-step regeneration

Sustainable Recovery of LiCoO2 from Spent Lithium-Ion Batteries: Simplicity, Scalability, and Superior Electrochemical Performance

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

Synthesis and Recyclability of Sheet-like Cobalt Carbonate Recovered from Spent Li-Ion Batteries Using a Simple Hydrometallurgy Process

Recovery Value Metals from Mixed Spent Li-Ion Batteries

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

Efficient recovery of valuable metals from cathode materials of spent LiCoO2 batteries via co-pyrolysis with cheap carbonaceous materials

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Recovery of LiCoO2 and graphite from spent lithium-ion batteries by molten-salt electrolysis

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Clean and efficient recovery of spent LiCoO cathode material: Water-leaching characteristics and low-temperature ammonium sulfate calcination mechanisms

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant