Abstract:Recovery of valuable metals from spent Li-ion batteries has prominent economic and environmental benefits. In this study, a novel approach for recycling valuable metals from spent LiCoO2 batteries via co-pyrolysis with three different carbonaceous materials (waste polyethylene, biomass, and coal)) was proposed and evaluated. The thermodynamic analysis proved that carbonaceous materials (mainly carbon) were theoretically able to facilitate the decomposition process of LiCoO2. The promotion effect on LiCoO2 decomposition was in the following order: coal > biomass > polyethylene, and the decomposition temperature of LiCoO2 could significantly reduce by 400 °C via adding coal. The char produced from the carbonaceous materials, rather than the volatiles, played an important role in LiCoO2 decomposition and reduction. The pyrolysis products of LiCoO2 and coal mixture exhibited typical superparamagnetism and hysteresis behaviours, which benefitted the subsequent magnetic separation. The recovery rates of Co and Li were sensitive to the pyrolysis temperature and residence time, respectively. A high proportion of Co was in the form of CoO below 800 °C and had not been completely reduced, leading to the relatively lower recovery rates of Co below 800 °C. The optimal recovery rates of Co (96.8%) and Li (88.7%) were obtained at the pyrolysis temperature of 800 °C and the residence time of 10 min. The final recovery products were Co and Li2CO3 with rather high crystallinities and purities. Therefore, this study provided a novel approach for the efficient recycling of valuable metals from spent Li-ion batteries with high application prospects.

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Recycling of valuable metals from spent cathode material by organic pyrolysis combined with in-situ thermal reduction

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

Efficient recovery of valuable metals from cathode materials of spent LiCoO2 batteries via co-pyrolysis with cheap carbonaceous materials

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

Recycling for Recovery of Critical Metals from LiCoO2 Cathode Material Through Methanesulfonic Acid-Citric Acid Organic Leaching System

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

Efficient recovery of lithium as Li2CO3 and cobalt as Co3O4 from spent lithium-ion batteries after leaching with p-toluene sulfonic acid

An innovative strategy for spent LiCoO 2 battery recycling based on chemical looping complementary reduction

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Direct recovery of LiCoO2 from the recycled lithium-ion batteries via structure restoration

Enhanced Green Leaching of Spent Lithium-Ion Batteries: Pyrolysis Pretreatment Combined with Eco-Friendly Citric Acid and Ascorbic Acid

Alkali Metal Salt Catalyzed Carbothermic Reduction for Sustainable Recovery of LiCoO2: Accurately Controlled Reduction and Efficient Water Leaching

Highly efficient re-cycle/generation of LiCoO2 cathode assisted by 2-naphthalenesulfonic acid

Spray pyrolysis technology-based closed-loop for regenerating single-crystal cathodes from spent lithium-ion batteries

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Preferentially selective extraction of lithium from spent LiCoO2 cathodes by medium-temperature carbon reduction roasting

A Combined Recovery Process Of Metals In Spent Lithium-Ion Batteries

Extraction of Li and Co from industrially produced Li-ion battery waste - Using the reductive power of waste itself