Abstract:In light of the ecological ramifications and material consumption stemming from exhausted lithium-ion batteries, an exigent requirement persists for efficient and expansible recycling techniques. Herein, we investigate an innovative expedited method to directly regenerate and enhance spent LiCoO2 (SLCO). The profoundly discharged SLCO powders, featuring an unimpaired crystal lattice, are isolated. These powders are then amalgamated with Li, Ni, and Mn precursors. Subsequent heating at elevated temperatures yields LNMO-SLCO, effecting the direct regeneration of LCO, accompanied by a synergistic re-lithiation process and the application of a LiNi0.5Mn1.5O4 (LNMO) coating, all achieved in a single step. The homogeneously thin spinel LNMO coating layer (10-15 nm) bestows upon LNMO-SLCO an enhanced cycling performance and charge-discharge rate capacity when benchmarked against SLCO and commercial LiCoO2 (CLCO). Evidently, at 0.1C, 0.5C, and 2C rates, LNMO-SLCO delivers discharge capacities of 214.4 mAh g  1, 187.4 mAh g  1, and 144.1 mAh g  1, respectively. Notably, it sustains 77.68 % of its original capacity following 100 cycles at 0.5 C. The merits of LNMO-SLCO are corroborated through cyclic voltammetry and electrochemical impedance spectroscopy, affirming its reduced charge transfer resistance and augmented lithium-ion solid phase diffusion coefficient. This endeavor stands as the foremost documented instance of a direct approach to SLCO reconstruction involving LNMO coating, culminating in the formation of LNMO-SLCO, characterized by sustained high-voltage cycling performance. The outlined re-lithiation and LNMO coating stratagem proffer valuable insights for the scalable, high-value recycling of SLCO, while remaining transposable to other spent cathode materials.

An innovative strategy for spent LiCoO 2 battery recycling based on chemical looping complementary reduction

Surplus energy utilization of spent lithium-ion batteries for high-profit organolithiums

Alkali Metal Salt Catalyzed Carbothermic Reduction for Sustainable Recovery of LiCoO2: Accurately Controlled Reduction and Efficient Water Leaching

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Direct conversion of degraded LiCoO2 cathode materials into high-performance LiCoO2: A closed-loop green recycling strategy for spent lithium-ion batteries

Direct conversion of degraded LiCoO<sub>2</sub> cathode materials into high-performance LiCoO<sub>2</sub>: A closed-loop green recycling strategy for spent lithium-ion batteries

Efficient recovery of valuable metals from cathode materials of spent LiCoO2 batteries via co-pyrolysis with cheap carbonaceous materials

Enhanced Leaching of Metals from Spent Lithium-Ion Batteries by Catalytic Carbothermic Reduction

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

Recovery of degraded LiCoO2 through a CO2 -assisted low-temperature thermal reduction approach

Novel electrochemically driven and internal circulation process for valuable metals recycling from spent lithium-ion batteries

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant

Sustainable recycling of LiCoO2 cathode scrap on the basis of successive peroxymonosulfate activation and recovery of valuable metals

Integrated process of CO2 sequestration and recycling spent LiFePO4 batteries

Sustainable Recovery of LiCoO2 from Spent Lithium-Ion Batteries: Simplicity, Scalability, and Superior Electrochemical Performance

Spray pyrolysis technology-based closed-loop for regenerating single-crystal cathodes from spent lithium-ion batteries

Recovery of valuable metals from spent lithium-ion batteries through biomass pyrolysis gas-induced reduction

Cleaner recycling of cathode material by in-situ thermite reduction