Abstract:The low-carbon recycling of spent lithium-ion batteries has become crucial due to the increasing need to address resource shortages and environmental concerns. Herein, a low-carbon, facile, and efficient method was developed to separate and recover Li, Al, and transition metals from spent ternary cathodes. Initially, the cathode materials post-discharge and disassembly do not require pre-sorting. Instead of using carbonaceous materials, the Al foil in the cathode serves as the reducing agent during reduction roasting. The impact of different roasting atmospheres (air, N2, CO2) on phase transitions and the extraction of valuable metals was examined. The findings revealed that after synergistic thermite reduction in a carbon dioxide atmosphere, the cathode material is completely dissociated. Li is selectively converted to Li2CO3 rather than LiAlO2, and the reduced reactivity of the Al foil encourages the formation of lower-valence oxides of Ni and Co, rather than their metallic forms. Under optimal roasting conditions at 650 °C for 1.0 h, 91.4% of Li can be preferentially and selectively extracted through carbonation water leaching, with less than 0.1% of Al and transition metals dissolving. Subsequently, ∼98% of Al and ∼99% of Ni, Co, and Mn can be leached using alkaline and acidic solutions, respectively. Compared to the traditional carbon thermal reduction process, this process offers several advantages including the elimination of pre-sorting and additional reducing agents, lower carbon emissions, and higher recovery rates of valuable metals. Thus, this process makes the recovery of metals from spent lithium-ion batteries more environmentally sustainable, simple, cost-effective, and adaptable.

Efficient recovery of valuable metals from cathode materials of spent LiCoO2 batteries via co-pyrolysis with cheap carbonaceous materials

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Recovery of valuable metals from spent lithium-ion batteries through biomass pyrolysis gas-induced reduction

An innovative strategy for spent LiCoO 2 battery recycling based on chemical looping complementary reduction

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

Green and Energy-Saving Recycling of LiCoO 2 by Synergetic Pyrolysis with Polyvinyl Chloride Plastics

Recycling of valuable metals from spent cathode material by organic pyrolysis combined with in-situ thermal reduction

Cleaner separation and recovery of valuable metals from spent ternary cathode via carbon dioxide synergetic thermite reduction strategy

Pyrolysis kinetics and reaction mechanism of the electrode materials during the spent LiCoO2 batteries recovery process

Efficient recovery of lithium as Li2CO3 and cobalt as Co3O4 from spent lithium-ion batteries after leaching with p-toluene sulfonic acid

Recovering valuable metals from LiNixCoyMn1-x-yO2 cathode materials of spent lithium ion batteries via a combination of reduction roasting and stepwise leaching

Preferentially selective extraction of lithium from spent LiCoO2 cathodes by medium-temperature carbon reduction roasting

Sustainable recycling of LiCoO2 cathode scrap on the basis of successive peroxymonosulfate activation and recovery of valuable metals

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

Recycling of Li, Co from spent LiCoO2 cathode materials through a low temperature urea-assisted sulfation roasting approach

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant

Improved recovery of valuable metals from spent lithium-ion batteries by efficient reduction roasting and facile acid leaching.

Study on the Synthesis of LiCoO2 from Spent Li-Ion Batteries

Recycling for Recovery of Critical Metals from LiCoO2 Cathode Material Through Methanesulfonic Acid-Citric Acid Organic Leaching System

Environmentally-friendly Oxygen-Free Roasting/wet Magnetic Separation Technology for in Situ Recycling Cobalt, Lithium Carbonate and Graphite from Spent LiCoO 2 /graphite Lithium Batteries