Abstract:Lithium cobalt oxide (LiCoO2) is the most widely used cathode materials for smart phones and laptop batteries. With the rapid development of portable electronics, more than 100,000 tons of spent lithium-ion batteries (LIBs) are produced every year. Conventional battery recycling processes including pyrometallurgical and hydrometallurgical processes mainly aim at extracting valuable metallic components from spent LIB cathodes, which requires high temperature reduction and/or acid/alkali chemicals to destroy covalent bond in cathodes and convert them into atoms for further extraction. The former leads to high energy consumption and the latter produces a lot of wastewater, which not only increases cost, but also damages our environment. Moreover, traditional recycling starts from spent battery cathodes and ends up with lithium/cobalt salts, which is unsustainable. Herein, a different recycling strategy to directly convert degraded LiCoO2 into high-voltage LiCoO2 cathode materials was proposed, featuring a closed-loop and green procedure. The directly-converted LiCoO2 from spent cathodes exhibits excellent cyclability at 4.5 V with a high capacity retention of 97.4% after 100 cycles, even superior than pristine LiCoO2. The recovery efficiencies of lithium and cobalt reach 91.3% and 93.5%, respectively, and the energy consumption could be greatly reduced since the roasting temperature was dropped below 400 & DEG;C with the assistance of ammonium sulfate. Due to the utilization of low-cost reagents and water as the leaching agent, the potential benefit of the recovery process was estimated to reach 6.94 $/kg cell.

Integrated process of CO2 sequestration and recycling spent LiFePO4 batteries

Process Development for the Recycle of Spent Lithium Ion Batteries by Chemical Precipitation

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Converting intercalation-type cathode in spent lithium-ion batteries into conversion-type cathode

Direct lithium extraction from spent batteries for efficient lithium recycling

Molten salt infiltration–oxidation synergistic controlled lithium extraction from spent lithium iron phosphate batteries: an efficient, acid free, and closed-loop strategy

Pyrolysis and physical separation for the recovery of spent LiFePO4 batteries

A green strategy towards fabricating FePO4-graphene oxide for high-performance cathode of lithium/sodium-ion batteries recovered from spent batteries

Built-in anionic equilibrium for atom-economic recycling of spent lithium-ion batteries

An innovative strategy for spent LiCoO 2 battery recycling based on chemical looping complementary reduction

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

A unique co-recovery strategy of cathode and anode from spent LiFePO4 battery

A novel acid-free leaching route of recovering Li2CO3 and FePO4 from spent LiFePO4 black powder

Two Targets, One Strike: Efficient Recovery of Lithium and Simultaneous Removal of Impurities from Spent LFP Batteries Via Ferric Ions Assisted Air Oxidation Method

Direct conversion of degraded LiCoO<sub>2</sub> cathode materials into high-performance LiCoO<sub>2</sub>: A closed-loop green recycling strategy for spent lithium-ion batteries

Novel electrochemically driven and internal circulation process for valuable metals recycling from spent lithium-ion batteries

Direct conversion of degraded LiCoO2 cathode materials into high-performance LiCoO2: A closed-loop green recycling strategy for spent lithium-ion batteries

Electrochemical Relithiation in Spent LiFePO 4 Slurry for Regeneration of Lithium-Ion Battery Cathode

Upcycling the spent graphite/LiCoO2 batteries for high-voltage graphite/LiCoPO4-co-workable dual-ion batteries

The priority leaching of lithium from spent LiFePO4 cathode without the oxidization