Abstract:Regeneration of spent lithium-ion battery (LIB) electrode materials is essential for sustainable development of the LIB energy storage sector and resource management of the critical metals such as Li, Co, Ni, and Mn. Enormous use of LIBs has been seen in the last two decades in portable electronic devices. In addition, now it is predicted that LIBs will be exploited in electric vehicles and stationary energy storage systems in the coming decades. Wider exploitation of LIB energy storage technologies creates an alarming situation, especially for the resource management of critical metals and the environment. In this work, we report the direct regeneration of a spent lithium cobalt oxide (LCO) cathode material. The deficiency of Li concentration in spent cathode material is fulfilled by the solid-state regeneration process just by heating with the required amount of Li2CO3 at 740 °C for 6 h. In particular, the Li void in the defective LCO crystal structure has been repaired, and the morphology is restored into the pristine LCO. Elemental analysis confirmed the increase of Li content to 7.4% in the relithiated cathode material in comparison to the spent cathode (5.28% Li). The X-ray diffraction study revealed the repair of degraded phase cobalt oxide to pristine phase LCO. XPS analysis also indicated the repair of the degraded phase from Co2+ to Co3+ in the regenerated LCO. Scanning electron microscopy analysis showed the improvement of microcrystals in the regenerated LCO. Cyclic voltammetry analysis showed the enhancement of electrochemical properties in the regenerated LCO and exhibited an enhanced initial charge specific capacity to 148.31 mAh/g at 0.1C rate in comparison to the spent LCO. This work demonstrated a simple and cost-effective regeneration process of spent LCO compared to the pyrometallurgy and hydrometallurgy where the critical metals are recycled in the form of alloys and individual salts, respectively.

Synthesis and Recyclability of Sheet-like Cobalt Carbonate Recovered from Spent Li-Ion Batteries Using a Simple Hydrometallurgy Process

Selective lithium extraction and regeneration of LiCoO2 cathode materials from the spent lithium-ion battery

Unravelling Li-ion Storage Capability of Cobalt Oxide Anode Recovered from Spent LiCoO2 Cathode via Carbothermal Reduction

Highly efficient re-cycle/generation of LiCoO2 cathode assisted by 2-naphthalenesulfonic acid

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

Sustainable Recovery of LiCoO2 from Spent Lithium-Ion Batteries: Simplicity, Scalability, and Superior Electrochemical Performance

Solid-State Direct Regeneration of Spent Lithium Cobalt Oxide Cathodes for Li-Ion Batteries

Converting spent lithium cobalt oxide battery cathode materials into high-value products via a mechanochemical extraction and thermal reduction route

Direct conversion of degraded LiCoO<sub>2</sub> cathode materials into high-performance LiCoO<sub>2</sub>: A closed-loop green recycling strategy for spent lithium-ion batteries

Recycling for Recovery of Critical Metals from LiCoO2 Cathode Material Through Methanesulfonic Acid-Citric Acid Organic Leaching System

Separation and Regeneration of LiNi 1/3 Co 1/3 Mn 1/3 O 2 Materials from Spent Lithium-Ion Batteries: A Facile Process

Recycling lithium cobalt oxide from its spent batteries: An electrochemical approach combining extraction and synthesis

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Direct conversion of degraded LiCoO2 cathode materials into high-performance LiCoO2: A closed-loop green recycling strategy for spent lithium-ion batteries

Direct recovery of LiCoO2 from the recycled lithium-ion batteries via structure restoration

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant

Novel electrochemically driven and internal circulation process for valuable metals recycling from spent lithium-ion batteries

Effective leaching of spent lithium-ion batteries using DL-lactic acid as lixiviant and selective separation of metals through precipitation and solvent extraction

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects