Effective leaching of spent lithium-ion batteries using DL-lactic acid as lixiviant and selective separation of metals through precipitation and solvent extraction

Sibananda Sahu,Niharbala Devi
DOI: https://doi.org/10.1007/s11356-022-24560-x
IF: 5.8
2022-12-16
Environmental Science and Pollution Research
Abstract:Recycling cathodic materials from spent lithium-ion batteries (LIBs) is crucial not just for the environmental aspects but also for the supply of precious raw materials such as cobalt and lithium. As a result, developing a leaching process with low acid consumption, cost-effectiveness, low environmental impact, and high metal recovery is essential. In this article, the sustainable hydrometallurgical route for recovery of Li and Co from spent LIBs using DL-lactic acid as lixiviant is proposed. The different leaching parameters were studied to optimize the leaching conditions. With increasing lactic acid concentration from 0.1 mol/L to 1.0 mol/L, the leaching efficiency of Li and Co increased from 23% to 41% and 2% to 14%, respectively. The reductant H 2 O 2 has a major role which reduced Co 3+ to Co 2+ and increasing the leaching efficiency of Co from 15.2% (1% H 2 O 2 ) to 73.4% (6% H 2 O 2 ). The maximum leaching efficiency of Li (99.8%) and Co (99%) was attained with 1.0 mol/L lactic acid, 6% H 2 O 2 , 60 °C, S/L ratio of 10 g/L, and 60 min leaching duration. The R 2 values for the surface chemical reaction model were greater than 0.98, indicating that the lactic acid leaching process was controlled by the surface chemical reaction model. With 1.0 mol/L 70% saponified Cyanex 272, a solvent extraction study showed a higher separation factor ( β Co/Li ) of 35.7 compared to other saponified and nonsaponified organophosphorus extractants. Using the precipitation method, 99.9% of Co and 99% of Li were precipitated as and with a purity of 99.4% and 98.3%, respectively.
environmental sciences
What problem does this paper attempt to address?