Abstract:Recycling of spent lithium-ion batteries (LIBs) has attracted widespread attention because of their dual attributes to environmental protection and resource conservation. Utilization of strong corrosive acids is currently the preferred way to recover valuable metals from spent LIBs, but the extensive use of chemical reagents can pose serious environmental risks. Herein, this research proposes a green process for selective recovery of lithium using the material of spent LIBs itself without adding exogenous reagents, mechanochemistry induced phase transition. The leaching efficiency of Li can reach 94% by employing the copper foil separated from spent LIBs as the co-grinding additive during the mechanochemical reaction process. Then, the high value LiOH·H2O can be prepared through direct evaporation and crystallization without adding any precipitant. Meanwhile, cobalt is almost remained in the leaching residue which can be recovered through a step-by-step separation process. XRD, XPS, and SEM-EDS characterizations show that LiCoO2 and copper foil are transformed into the soluble Li2O, and insoluble CuO and CoO under the mechanical force. Finally, the soluble Li2O is dissolved in water to prepare the LiOH solution, and the insoluble CuO and CoO are transformed into Cu2O and Co(OH)2. On the basis of the experimental investigation, it is proven that the proposed process is suitable for selectively recovering Li from all types of cathode materials without generating salty wastewater or introducing chemical reagents. Thus, the proposed approach can ensure the efficient recovery of valuable metals from spent LIBs while avoiding the potential threat to the environment and human health.

Coupling Electrochemical Leaching with Solvent Extraction for Recycling Spent Lithium-Ion Batteries

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

A Combined Recovery Process Of Metals In Spent Lithium-Ion Batteries

Effective leaching of spent lithium-ion batteries using DL-lactic acid as lixiviant and selective separation of metals through precipitation and solvent extraction

Novel Approach to Recover Cobalt and Lithium from Spent Lithium-Ion Battery Using Oxalic Acid.

Novel electrochemically driven and internal circulation process for valuable metals recycling from spent lithium-ion batteries

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Solvent extraction for recycling of spent lithium-ion batteries

HO-balance-regulated Cation−anion Competitive Coordination for Selective Elements Extraction from Spent Lithium-Ion Batteries

Recycling lithium cobalt oxide from its spent batteries: An electrochemical approach combining extraction and synthesis

Selective Extraction of Critical Metals from Spent Li‐ion Battery Cathode: Cation‐Anion Coordination and Anti‐Solvent Crystallization

Succinic Acid-Based Leaching System: A Sustainable Process for Recovery of Valuable Metals from Spent Li-ion Batteries

Efficient recovery of lithium as Li2CO3 and cobalt as Co3O4 from spent lithium-ion batteries after leaching with p-toluene sulfonic acid

Extraction of Li and Co from industrially produced Li-ion battery waste - Using the reductive power of waste itself

A Novel Green Process for Recovery of Transition Metal Ions from Used Lithium-ion Batteries by Selective Coordination of Ethanol

Designing Low-Cost, Green, and Recyclable Deep Eutectic Solvents for Selective Separation and Recovery of Valuable Metals from Spent Li-Ion Batteries

A sustainable approach for selective recovery of lithium from cathode materials of spent lithium-ion batteries by induced phase transition

Deep eutectic solvent with acidity, reducibility, and coordination capability for recycling of valuable metals from spent lithium-ion battery cathodes

Separation of Valuable Metals in The Recycling of Lithium Batteries via Solvent Extraction

A novel ternary deep eutectic solvent for efficient recovery of critical metals from spent lithium-ion batteries under mild conditions