Abstract:In the present manuscript, a simple hydrometallurgy process for recovering and recycling cobalt from spent lithium cobalt oxide LiCoO2 (LCO) in lithium-ion batteries (LIBs) is described. First, the black material (BM) containing LCO active material is extracted by discharging, dismantling and detachment of cathode active materials with an organic solvent. Then, sulfuric acid (H2SO4) and hydrogen peroxide (H2O2) are used to fully dissolve Co and Li in an aqueous solution at high dissolution efficiency (more than 99% of Li and Co). After a purification step, Co is selectively precipitated and separated from Li, as CoCO3, using a simple method. Results show that the obtained CoCO3 crystals have a unique sheets-like structure with a purity of more than 97% and could be reused to regenerate LCO active material for LIB. The as-prepared sheet-like CoCO3 was then converted to flower-like LCO through a solid-state reaction with commercial lithium carbonate (Li2CO3). Electrochemical performances of the regenerated LCO (LCOReg) in LIB have been studied. Interestingly, the flower-like LCOReg showed a good charge capacity of about 145 mAh.g−1 at the first cycle, compared to LCO synthesized from commercial cobalt and lithium precursors (LCOCom). Specific charge capacity and columbic efficiency also remained relatively stable after 60 charge/discharge cycles. The proposed recycling process of Co in the present work doesn’t require the use of the complicated and expensive solvent extraction method and thus it is simple, cost-effective, environmentally-friendly and could be used for recovering high purity critical metals such as Co and Li from spent LIBs at the industrial scale.

Recycling Technology for Co and Al from Spent Li-ion Batteries

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate

Study on the Synthesis of LiCoO2 from Spent Li-Ion Batteries

A Simplified Process for Recovery of Li and Co from Spent LiCoO2 Cathode Using Al Foil As the in Situ Reductant

Preparation of LiCoO 2 Cathode Materials from Spent Lithium–ion Batteries

A Combined Recovery Process Of Metals In Spent Lithium-Ion Batteries

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

Reclamation of Lithium Cobalt Oxide from Waste Lithium Ion Batteries to Be Used as Recycled Active Cathode Materials

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Preparation of LiNi1/3Co1/3Mn1/3O2 cathode materials from spent Li-ion batteries

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Recycling lithium cobalt oxide from its spent batteries: An electrochemical approach combining extraction and synthesis

Recovery of LiCoO2 and graphite from spent lithium-ion batteries by molten-salt electrolysis

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Extraction of Co and Li2CO3 from cathode materials of spent lithium-ion batteries through a combined acid-leaching and electro-deoxidation approach

Recovery Value Metals from Mixed Spent Li-Ion Batteries

Recycling of LiCoO2 cathode material from spent lithium ion batteries by ultrasonic enhanced leaching and one-step regeneration

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Efficient recovery of valuable metals from cathode materials of spent LiCoO2 batteries via co-pyrolysis with cheap carbonaceous materials

Synthesis and Recyclability of Sheet-like Cobalt Carbonate Recovered from Spent Li-Ion Batteries Using a Simple Hydrometallurgy Process

Synthesis and Electrochemical Performances of LiCoO 2 Recycled from the Incisors Bound of Li-ion Batteries