Abstract:This study presents a novel recycling scheme for spent Li-ion batteries that involves the leaching of lithium in hot water followed by the dissolution of all transition metals in HCl solution and their separation using the ionic liquid Cyphos IL104. The parametric studies revealed that >84 % Li was dissolved while the cathode material was leached at 90 °C for 2 h. Approximately 98 % Li from the non-acidic solution was directly precipitated as Li2CO3 at a Li+:CO32− ratio of 1:1.5. The transition metals from the Li-depleted cathode mass were efficiently (>98 %) dissolved in 3.0 mol·L−1 HCl at 90 °C for a 3 h leaching process. Manganese from the chloride leach liquor was selectively precipitated by adding KMnO4 at a 1.25-fold higher quantity than the stoichiometric ratio, pH value 2.0, and temperature 80 °C. The remaining co-existing metals (Ni and Co) were separated from the chloride solution by contacting it with a phosphonium-based ionic liquid at an equilibrium pH value of 5.4 and an organic-to-aqueous phase ratio of 2/3. The loaded ionic liquid was quantitatively stripped in 2.0 mol·L−1 H2SO4 solution, which yielded high-purity CoSO4·xH2O crystals after evaporation of the stripped liquor. Subsequently, ∼99 % nickel was recovered as nickel carbonate [NiCO3·2Ni(OH)2] from the Co-depleted raffinate by the precipitation performed at Ni2+:CO32− ratio of 1:2.5, pH value of 10.8, and temperature of 50 °C. Finally, a process flow with mass and energy balances yielding a high recovery rate of all metals in the exhausted cathode powder of spent LiBs was proposed.

Recovery of high-purity metallic cobalt from lithium nickel manganese cobalt oxide (NMC)-type Li-ion battery

Cobalt Recovery from Lithium-ion Battery by Ion-exchange Method

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Process for the Recovery of Cobalt Oxalate from Spent Lithium-Ion Batteries

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Environmentally Friendly Recovery of Li2CO3 from Spent Lithium-Ion Batteries by Oxidation and Selective Leaching Process

Lithium recycling and cathode material regeneration from acid leach liquor of spent lithium-ion battery via facile co-extraction and co-precipitation processes

Recovering valuable metals from the leaching liquor of blended cathode material of spent lithium-ion battery

Antisolvent Precipitation for Metal Recovery from Citric Acid Solution in Recycling of NMC Cathode Materials

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

Recovery of Valuable Metals from Anode Material of Hydrogen-Nickel Battery

Recovery of cobalt from spent lithium ion batteries using sulphuric acid leaching followed by solid–liquid separation and solvent extraction

A feasible process for recycling valuable metals from LiNi0.5Co0.2Mn0.3O2 cathode materials of spent Li-ion batteries

Leaching Process for the Recovery of Valuable Metals from Spent Lithium-nickel-cobalt-manganese-oxide-based Lithium-ion Batteries

Recovery of Ni, Co and Rare Earths from Spent Ni–metal Hydride Batteries and Preparation of Spherical Ni(OH)2

Recovery of critical metals from spent Li-ion batteries: Sequential leaching, precipitation, and cobalt–nickel separation using Cyphos IL104

Stepwise Recycling of Valuable Metals from Ni-rich Cathode Material of Spent Lithium-Ion Batteries

Cobalt Electrochemical Recovery from Lithium Cobalt Oxides in Deep Eutectic Choline Chloride+Urea Solvents

Highly Selective Extraction of Lithium from Spent NCM Cathode Powder Reconstructive Electrode by Acid-Free Electrochemical Process

Recovery Value Metals from Mixed Spent Li-Ion Batteries