Abstract:Spent lithium-ion batteries (LIBs) contain large amounts of scarce metals, such as Li, Co, Al, Ni, and Mn, and are precious secondary resources. The leaching of spent LIBs using organic acids is considered to be an effective and feasible method for recovering these metals. However, the separation of Li, Co, Ni, and Mn in a solution is difficult to achieve. Using an extractant consisting of 15 % Cyanex272, 10 % tributyl phosphate, and 75 % sulfonated kerosene (v/v) and an organic to aqueous phase ratio of 1:1, over 90.13 % of Al, 95.72 % of Co, and 98.93 % of Mn were extracted. Only 2.05 % of Li and 2.68 % of Ni were co-extracted. The slope method and infrared spectra analysis showed that the extraction processes of Al, Co, and Mn with Cyanex272 follow cationic exchange mechanisms; the acetate anions introduced during the leaching participated in the extraction mechanism of Co. The thermodynamic parameters of Gibb’s free energy, enthalpy change, and entropy change for the extraction reactions were all lower than zero, indicating that the extraction reactions are exothermic and spontaneous and increase the disorder. After washing with NH4HSO4 1 M, most of the Co and Mn were removed, and a negligible amount of Al was lost. By adding 2.5 times the stoichiometric amount of (NH4)2S2O8 to the washing solution and heating at 363.15 K for 40 min, 99.3 % of the Mn was precipitated as MnO2 with a purity of 96.73 %. After removing Mn, Co2+ was precipitated as CoC2O4·2 H2O using anhydrous oxalic acid; Co3O4 with a purity of 98.13 % was subsequently obtained by calcination. This study demonstrates the potential of hydrometallurgical processes for the treatment of spent LIBs and provides insights into strategies for the utilization of secondary resources.

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Separation of Co(II), Mn(II), and Ni(II) by solvent extraction with Cyanex 272 and D2EHPA from the sulfuric acid leaching solution of spent lithium-ion batteries

Recovery of High-Purity Lithium Compounds from the Dust of the Smelting Reduction Process for Spent Lithium-Ion Batteries

Cobalt Recovery from Lithium-ion Battery by Ion-exchange Method

Recovery of critical metals from spent Li-ion batteries: Sequential leaching, precipitation, and cobalt–nickel separation using Cyphos IL104

Recovery of Lithium, Nickel, and Cobalt from Spent Lithium-Ion Battery Powders by Selective Ammonia Leaching and an Adsorption Separation System

Recovery of cobalt from spent lithium ion batteries using sulphuric acid leaching followed by solid–liquid separation and solvent extraction

Process for the Recovery of Cobalt Oxalate from Spent Lithium-Ion Batteries

Separation of Co and Mn from acetic acid leaching solution of spent lithium-ion battery by Cyanex272

Efficient Recovery of Value Metals from Spent Lithium-Ion Batteries by Combining Deep Eutectic Solvents and Coextraction

Metal Reclamation from Spent Lithium-Ion Battery Cathode Materials: Directional Conversion of Metals Based on Hydrogen Reduction

Priority recovery of lithium and effective leaching of nickel and cobalt from spent lithium-ion battery

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Recovery of high-purity metallic cobalt from lithium nickel manganese cobalt oxide (NMC)-type Li-ion battery

A Combined Recovery Process Of Metals In Spent Lithium-Ion Batteries

Selective Recovery of Valuable Metals from Spent Lithium-Ion Batteries – Process Development and Kinetics Evaluation

Recovery Value Metals from Mixed Spent Li-Ion Batteries