Abstract:Spent lithium-ion batteries (LIBs) contain large amounts of scarce metals, such as Li, Co, Al, Ni, and Mn, and are precious secondary resources. The leaching of spent LIBs using organic acids is considered to be an effective and feasible method for recovering these metals. However, the separation of Li, Co, Ni, and Mn in a solution is difficult to achieve. Using an extractant consisting of 15 % Cyanex272, 10 % tributyl phosphate, and 75 % sulfonated kerosene (v/v) and an organic to aqueous phase ratio of 1:1, over 90.13 % of Al, 95.72 % of Co, and 98.93 % of Mn were extracted. Only 2.05 % of Li and 2.68 % of Ni were co-extracted. The slope method and infrared spectra analysis showed that the extraction processes of Al, Co, and Mn with Cyanex272 follow cationic exchange mechanisms; the acetate anions introduced during the leaching participated in the extraction mechanism of Co. The thermodynamic parameters of Gibb’s free energy, enthalpy change, and entropy change for the extraction reactions were all lower than zero, indicating that the extraction reactions are exothermic and spontaneous and increase the disorder. After washing with NH4HSO4 1 M, most of the Co and Mn were removed, and a negligible amount of Al was lost. By adding 2.5 times the stoichiometric amount of (NH4)2S2O8 to the washing solution and heating at 363.15 K for 40 min, 99.3 % of the Mn was precipitated as MnO2 with a purity of 96.73 %. After removing Mn, Co2+ was precipitated as CoC2O4·2 H2O using anhydrous oxalic acid; Co3O4 with a purity of 98.13 % was subsequently obtained by calcination. This study demonstrates the potential of hydrometallurgical processes for the treatment of spent LIBs and provides insights into strategies for the utilization of secondary resources.

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Study of Spent Battery Material Leaching Process

Extraction of Valuable Metals from Waste Battery Material

Differential Removal of Copper and Iron from Acidic Polymetallic Aqueous Solutions

Separation of Valuable Metals in The Recycling of Lithium Batteries via Solvent Extraction

Recovery Value Metals from Mixed Spent Li-Ion Batteries

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries

A feasible process for recycling valuable metals from LiNi0.5Co0.2Mn0.3O2 cathode materials of spent Li-ion batteries

High-selective separation recovery of Ni, Co, and Mn from the spent LIBs via acid dissolution and multistage oxidation precipitation

Separation of Co and Mn from acetic acid leaching solution of spent lithium-ion battery by Cyanex272

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Recovery of Ni, Co and Rare Earths from Spent Ni–metal Hydride Batteries and Preparation of Spherical Ni(OH)2

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device

Recovering valuable metals from the leaching liquor of blended cathode material of spent lithium-ion battery

Separation of Co(II), Cu(II), Ni(II) and Mn(II) from synthetic hydrochloric acid leaching solution of spent lithium ion batteries by solvent extraction

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries

Novel electrochemical process for recycling of valuable metals from spent lithium-ion batteries

Novel approach to recycling of valuable metals from spent lithium-ion batteries using hydrometallurgy, focused on preferential extraction of lithium

Separation of nickel, cobalt and magnesium from the spent MH-NI and CD -NI battery anode materials

Selective Extraction of Transition Metals from Spent LiNix Coy Mn1-x-y O2 Cathode via Regulation of Coordination Environment

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation