Abstract:The use of lithium-ion batteries (LIBs) is skyrocketing since they are widely applied in portable consumer devices and electric vehicles. However, at the end of their lifetime, large amount of spent LIBs will result in a negative environmental impact and aggravate the problem of resource shortage without proper disposal. Therefore, recycling is an effective solution, which will be enforced in the near future. Herein, the purification, recovery and reuse of transition metals from spent LIBs were thoroughly studied. First, the target impurities in a solution were effectively removed individually. Iron(iii) and aluminum(iii) impurities were removed by adjusting the pH value, whereas copper(ii) was purified using highly selective electrodeposition technology and solvent extraction. Second, Ni0.41Co0.21Mn0.38(OH)2 was co-precipitated by adjusting the pH value of the purified metal solution, containing nickel(ii), cobalt(ii) and manganese(ii) ions to 11 with NaOH and a proper amount of NH3·H2O. The comprehensive loss in nickel(ii), cobalt(ii) and manganese(ii) was only 0.37% in the purification and co-precipitation procedures. Finally, LiNi0.41Co0.21Mn0.38O2 (marked as LNCM-R) synthesized with the recycled materials was tested and compared with LiNi0.41Co0.21Mn0.38O2 (marked as LNCM-N) synthesized with new materials as the control group. The XRD, SEM and TEM results indicate that both samples have the same structure and morphology. Furthermore, the charge-discharge tests, initial dQ/dV curves, EIS and GITT results indicate a similar electrochemical performance of the LNCM-R and LNCM-N samples. The purification and recycling strategies in our research have high efficiency and comparatively low cost, which provide great guidance for the industrial recycling of spent Li-ion batteries.

High-selective separation recovery of Ni, Co, and Mn from the spent LIBs via acid dissolution and multistage oxidation precipitation

Stepwise Recovery Of Valuable Metals From Spent Lithium Ion Batteries By Controllable Reduction And Selective Leaching And Precipitation

Selective Recovery of Valuable Metals from Spent Lithium-Ion Batteries – Process Development and Kinetics Evaluation

One-step selective separation and efficient recovery of valuable metals from mixed spent lithium batteries in the phosphoric acid system

Selective Separation and Recovery of Lithium, Nickel, MnO2, and Co2O3 from LiNi0.5Mn0.3Co0.2O2 in Spent Battery

Novel electrochemical process for recycling of valuable metals from spent lithium-ion batteries

Recovery of Li, Ni, Co and Mn from spent lithium-ion batteries assisted by organic acids: Process optimization and leaching mechanism

Efficient extraction of valuable metals from spent LiNi0.5Co0.2Mn0.3O2 cathode based on an acid-free leaching process

Selective Extraction of Transition Metals from Spent LiNix Coy Mn1-x-y O2 Cathode via Regulation of Coordination Environment

Recovery of metals from sulfate leach solutions of spent ternary lithium-ion batteries by precipitation with phosphate and solvent extraction with P507

Acid-Free Leaching Nickel, Cobalt, Manganese, and Lithium from Spent Lithium-Ion Batteries Using Fe(II) and Fe(III) Solution

Separation and recovery of valuable metals from spent lithium-ion batteries via concentrated sulfuric acid leaching and regeneration of LiNi1/3Co1/3Mn1/3O2

Leaching Process for Recovering Valuable Metals from the LiNi1/3Co1/3Mn1/3O2 Cathode of Lithium-Ion Batteries.

Impurity removal with highly selective and efficient methods and the recycling of transition metals from spent lithium-ion batteries

Selective Extraction of Critical Metals from Spent Li‐ion Battery Cathode: Cation‐Anion Coordination and Anti‐Solvent Crystallization

New strategy of electrochemical precipitation to metals separation in spent NCM cathode materials for direct regeneration

Co-Precipitation of Metal Oxalates from Organic Leach Solution Derived from Spent Lithium-Ion Batteries (LIBs)

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Separation of Co and Mn from acetic acid leaching solution of spent lithium-ion battery by Cyanex272

High-efficiency recovery of valuable metals from spent lithium-ion batteries: Optimization of SO 2 pressure leaching and selective extraction of trace impurities

Leaching Process for the Recovery of Valuable Metals from Spent Lithium-nickel-cobalt-manganese-oxide-based Lithium-ion Batteries