Abstract:Spent lithium-ion batteries contain valuable metals such as cobalt, lithium, manganese and nickel. Smelting reduction of spent LIBs at high temperature results in metallic alloys. Therefore, it is necessary to recover the valuable metal ions present in the sulfuric acid leaching solutions of the metallic alloys. In this work, solvent extraction experiments were performed to separate the three metal ions, Co(II), Mn(II) and Ni(II) present in the leaching solutions of the metallic alloys. Synthetic sulfate solutions were prepared and commercial organophosphorous extractants were employed. First, both Co(II) and Mn(II) were completely extracted in one stage by using 40% saponified 0.3 M Cyanex 272, leaving Ni(II) in the raffinate. The small amount of Ni(II) co-extracted into Cyanex 272 was removed by two stages of cross-current scrubbing using pure CoSO4 solution. The effect of pH and CoSO4 concentration of the scrubbing solution on the scrubbing of Ni(II) was investigated. The Co(II) and Mn(II) present in the scrubbed Cyanex 272 were completely stripped by 0.05 M H2SO4 solution. Batch simulation experiments for the three stage of counter-current extraction with 1 M D2EHPA verified that Mn(II) and Co(II) were completely separated by selective extraction of Mn(II) into D2EHPA, leaving Co(II) in the raffinate. By consecutive extraction with Cyanex 272 and D2EHPA, pure solutions of Co(II), Mn(II) and Ni(II) with purity higher than 99.9% can be recovered from the starting solutions. A process was proposed for the treatment of sulfuric acid leaching solutions of spent LIBs containing Co(II), Mn(II) and Ni(II) by solvent extraction.

Separation of nickel, cobalt and magnesium from the spent MH-NI and CD -NI battery anode materials

Recovery of Ni, Co and Rare Earths from Spent Ni–metal Hydride Batteries and Preparation of Spherical Ni(OH)2

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Separation of Cobalt from Ni(OH)2 Positive Materials by a Reduction and Dissolution Process in Alkali Solution

Comprehensive Recovery of NCM Cathode Materials for Spent Lithium-Ion Batteries by Microfluidic Device

Separation of valuable metals from mixed cathode materials of spent lithium-ion batteries by single-stage extraction

Hydrometallurgical Process Of Waste Cadmiumi-Nickel Cells And Cathode Materials From Battery Plants

Recovery of Valuable Metals from Anode Material of Hydrogen-Nickel Battery

Separation of Co(II) and Ni(II) from Hydrochloric Acid Leach Liquor by Solvent Extraction and Crystallization

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Simultaneous extraction and separation of Ni(OH) 2 , Ni powder and Ni plate from waste nickel-cobalt scrap in one spot: Control sequence of electrical reduction

Separation of Co(II), Mn(II), and Ni(II) by solvent extraction with Cyanex 272 and D2EHPA from the sulfuric acid leaching solution of spent lithium-ion batteries

Selective Separation and Recovery of Lithium, Nickel, MnO2, and Co2O3 from LiNi0.5Mn0.3Co0.2O2 in Spent Battery

An Alternative Approach to Reclaim Spent Nickel–metal Hydride Batteries

Separation of Cobalt/lithium in Spent NCM-based Lithium Ion Battery Leaching Solution Via Reactive Extraction-Reextraction with Microdispersed (G1/L1+G2)/L2 Emulsion

Separation of Valuable Metals in The Recycling of Lithium Batteries via Solvent Extraction

Study of Spent Battery Material Leaching Process

Recovery of high-purity metallic cobalt from lithium nickel manganese cobalt oxide (NMC)-type Li-ion battery

Mechanism-driven Moderate Alkalinity Release for Efficient Recovery of High-Purity Cobalt and Nickel from Spent Lithium-Ion Batteries

Selective Co-Extraction of Critical Metals from Deep Ocean Polymetallic Nodule Leachate and Preparation of Battery-Grade Ni-Co-Mn Solution

Separation and Recovery of Cobalt and Nickel from Electro-solution of Co-Ni Waste