Abstract:Electroplating sludge is extensively produced in chemical precipitation-based treatment of electroplating wastewater. It poses a huge threat to environmental safety if not properly disposed, ascribed to its high contents of heavy metals. An innovative metallurgical approach was proposed a to recycle Cu, Cr, and Ni from it. Ammonia leaching was firstly performed to selectively leach Cu from Cr, in which the Cu oxide and sulfide were leached into the leachate while the Cr oxide and Ni carbide (NiCx) retained in the residue. (NH4)2SO4 increased the Cu leaching rate via increasing the dissolved oxygen amount in the ammonia leachate and converting CuS to Cu2+. Under the optimal conditions, the leaching efficiency of Cu achieved 96.5 % while that of Cr was only 0.1 %. In the followed aluminothermic reduction, C in the leaching residue could be effectively removed via a thermal oxidation, which in turn decreased the formation of a C-containing compound of high melting point and benefited the Cr and Ni recovery. Cr and Ni from the residue were reduced and recovered in a Cr-Ni alloy, and the reductant of Al first changed to a refractory Al2O3 and then transformed to a low melting point 12CaO·7Al2O3 with the additive of CaO. This transformation increased the molten slag fluidity and promoted the separation of Cr-Ni alloy from slag. Moreover, the excessive Al increased the Cr and Ni yields and concentrated all of them to be together. Partial Al was used as reductant, and the other Al transferred into Cr-Ni alloy to decrease its melting point. Cr and Ni contents in the smelting slag could be decreased to 0.11 wt% and 0.12 wt% respectively, showing an efficient recovery. This work provided a high efficiency method to recover Cu, Cr, and Ni from waste electroplating sludge.

Differential Removal of Copper and Iron from Acidic Polymetallic Aqueous Solutions

Removal of impurity metals as phosphates from Lithium-ion battery leachates

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Extraction of Valuable Metals from Waste Battery Material

Removal of iron, aluminium, manganese and copper from leach solutions of lithium-ion battery waste using ion exchange

Study of Spent Battery Material Leaching Process

Recovery of Nickel and Cobalt Metal Powders from the Leaching Solution of Spent Lithium-Ion Battery by Solvent Extraction and Chemical Reduction

Selective Separation and Recovery of Lithium, Nickel, MnO2, and Co2O3 from LiNi0.5Mn0.3Co0.2O2 in Spent Battery

High-selective separation recovery of Ni, Co, and Mn from the spent LIBs via acid dissolution and multistage oxidation precipitation

Use of ferric salt solutions as leaching agents of Co, Ni, Cu, Fe, and Mn from metallic alloys of spent lithium-ion batteries and separation of iron from the leaching solution

Separation of Valuable Metals in The Recycling of Lithium Batteries via Solvent Extraction

Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries

Separation of Co and Mn from acetic acid leaching solution of spent lithium-ion battery by Cyanex272

Recovery Value Metals from Mixed Spent Li-Ion Batteries

Low-viscosity acidic deep eutectic solvent for extraction of valuable metals from spent NCM

Electrolytic Separation and Reuse of Active Materials from Discarded Lithium-Ion Batteries

Separation of Co(II), Cu(II), Ni(II) and Mn(II) from synthetic hydrochloric acid leaching solution of spent lithium ion batteries by solvent extraction

Recovering valuable metals from LiNixCoyMn1-x-yO2 cathode materials of spent lithium ion batteries via a combination of reduction roasting and stepwise leaching

Recovering valuable metals from the leaching liquor of blended cathode material of spent lithium-ion battery

A metallurgical approach for separation and recovery of Cu, Cr, and Ni from electroplating sludge

Leaching Process for Recovering Valuable Metals from the LiNi1/3Co1/3Mn1/3O2 Cathode of Lithium-Ion Batteries.