Abstract:Lithium is a representative rare metal and ranks 32nd in abundance among elements in the earth’s crust. Lithium is used in a variety of applications, including the production of organolithium compounds, as an alloying addition to aluminum and magnesium, and as the anode in rechargeable lithium ion batteries especially for electronic devices and electric vehicles. Today, lithium is an indispensable metal in our daily lives. It is important to recycle lithium from used lithium-ion batteries to prepare for lithium shortages and protect lithium resources. The active cathode material of a lithium ion battery contains other valuable metals including Ni, Co, and Mn. In this study, the effect of carbonation temperature on Li recovery from NCM (LiNixCoyMnzO2) powder as Li2CO3 was investigated. First, a carbonation roasting was performed to convert the Li in the NCM powder into Li2CO3 at various temperature using a thermo-gravimetric analyzer. The roasted cinder leached into the water to dissolve the Li2CO3. The results showed that in Ar gas atmosphere the NCM phase was decomposed into Li2O and Li1-xM1+xO2 phases and the weight decreased by 4.7%, but in a CO2 atmosphere Li2CO3 was formed, resulting in a 12.1% increase in weight. In the isothermal experiment, the weight and carbon concentration of cinder increased with temperature, and the Li ratio in the NCM gradually decreased. The NCM powder was able to react with CO2 above 853 K, while some nickel, cobalt and manganese were regenerated into different Li1-xM1+xO2 crystalline phases. The maximum Li recovery rate of 76% wsa achieved for 2 h carbonation roasting at 1073 K followed by water leaching, filtering and an evaporative crystallization process.

Recovering Lithium from the Cathode Active Material in Lithium-Ion Batteries via Thermal Decomposition

Recovery of Cobalt and Lithium by Carbothermic Reduction of LiCoO2 Cathode Material: A Kinetic Study

Lithium Recovery from NCM Lithium Ion Battery by Carbonation Roasting Followed by Water Leaching

Synthesis of Lithium Fluoride from Spent Lithium Ion Batteries

Preparation of Battery-Grade Lithium Carbonate with Lithium-Containing Desorption Solution

Recovery of Li and Co in Waste Lithium Cobalt Oxide-Based Battery Using H1.6Mn1.6O4

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Clean and efficient recovery of spent LiCoO cathode material: Water-leaching characteristics and low-temperature ammonium sulfate calcination mechanisms

A combined process for cobalt recovering and cathode material regeneration from spent LiCoO2 batteries: Process optimization and kinetics aspects

Efficient Recovery of Lithium Cobaltate from Spent Lithium-Ion Batteries for Oxygen Evolution Reaction

Facile Recovery of Lithium as Li2CO3 or Li2O from α-Hydroxy-Carboxylic Acid Chelates through Pyrolysis and the Decomposition Mechanism

Reclamation of Lithium Cobalt Oxide from Waste Lithium Ion Batteries to Be Used as Recycled Active Cathode Materials

Preferentially selective extraction of lithium from spent LiCoO2 cathodes by medium-temperature carbon reduction roasting

A promising method for recovery of graphite and cathode materials from spent lithium-ion batteries

Unveiling the lithium deintercalation mechanisms in spent lithium-ion batteries via sulfation roasting

IMPROVED RECLAIMATION OF LITHIUM COBALT OXIDE FROM WASTE LITHIUM ION BATTERIES TO BE USED AS RECYCLED ACTIVE CATHODE MATERIAL

Organics removal combined with in situ thermal-reduction for enhancing the liberation and metallurgy efficiency of LiCoO2 derived from spent lithium-ion batteries

Fluorine fixation for spent lithium-ion batteries toward closed-loop lithium recycling

Recovery of Graphite and Cathode Active Materials from Spent Lithium-Ion Batteries by Applying Two Pretreatment Methods and Flotation Combined with a Rapid Analysis Technique

Lithium Extraction from Lithium-Bearing Clay Minerals by Calcination-Leaching Method