Abstract:Demand for lithium-ion batteries (LIBs) has increased dramatically over the years due to the rapid market expansion of electric vehicles. However, many of the essential components of cathode materials, such as cobalt, nickel, manganese and lithium, are resource-limited and expensive[1]. Therefore, recycling of used LIB cathode materials is very important to conserve resources and the environment. Currently, the lithium secondary battery recycling technology mainly uses wet and dry smelting, but there is a disadvantage of high energy consumption due to the use of strong acid and the smelting process[2-3]. In this study, the cathode active material was separated from a pouch-type lithium secondary battery separated from a portable tablet that was over 10 years old and the chemical, structural, and electrochemical characteristics thereof were investigated. The cathode active materials were dismantled from a pouch-type LIB, which was removed from the tablet produced in 2011. The pouch cell was in a swelling state and the OCV was 0V due to internal short is expected. As a result of TGA analysis, the electrode composition was confirmed to be 92wt% of the cathode active material, 3wt% of the conductive agent, and 3wt% of the binder, respectively. The recovery rate of the active material is the best when a mixed solvent including NMP, heating, and ultrasonic, respectively. Through SEM and EDS analysis, copper metal due to dissolution of the negative electrode current collector was found on the surface of the positive electrode. As shown in Fig. 1, It can be seen that the positive electrode active material recovered using the composite solvent is a positive electrode active material that is a mixture of NCM active material and LMO active material. The XRD results shows a well layered structure and a Co 3 O 4 phase due to lithium deficiency. In order to examine the electrochemical characteristics of the recovered electrode, it was reassembled into a 2032 coin type cell and evaluated, and the discharge capacity of approximately 150mAh/g was recovered as shown in Fig. 2. The positive active material recovered according to the experimental results is estimated to be in a state of insufficient lithium, and a lithium compensation process is planned to be additionally performed in the future.

IMPROVED RECLAIMATION OF LITHIUM COBALT OXIDE FROM WASTE LITHIUM ION BATTERIES TO BE USED AS RECYCLED ACTIVE CATHODE MATERIAL

Reclamation of Lithium Cobalt Oxide from Waste Lithium Ion Batteries to Be Used as Recycled Active Cathode Materials

Recovery of Lithium and Heavy Non-Ferrous Metals from Spent Lithium-Ion Batteries

Lithium Battery Recycling Management and Policy

Recycling and Disposal of Lithium Battery: Economic and Environmental Approach

Efficient Recovery of Lithium Cobaltate from Spent Lithium-Ion Batteries for Oxygen Evolution Reaction

Innovative Electrochemical Strategy to Recovery of Cathode and Efficient Lithium Leaching from Spent Lithium-Ion Batteries

Recovery of Cobalt and Lithium Values from Discarded Li-Ion Batteries

Direct conversion of degraded LiCoO<sub>2</sub> cathode materials into high-performance LiCoO<sub>2</sub>: A closed-loop green recycling strategy for spent lithium-ion batteries

An Effective Relithiation Process for Recycling Lithium‐Ion Battery Cathode Materials

Reclaimed and Up-Cycled Cathodes for Lithium-Ion Batteries

Recovery of spent LiCoO2 lithium-ion battery via environmentally friendly pyrolysis and hydrometallurgical leaching

Research for Electrochemical & Structural Properties of Recycling Cathode Materials for End of Life Lib

Recovery of Laminar LiCoO2 Materials from Spent Mobile Phone Batteries by High-Temperature Calcination

Advanced Recycling and Recovery of Spent Lithium-Ion Batteries with Bioleaching Processes using A. ferrooxidans to Achieve Cleaner Battery Production

Preparation of LiCoO 2 Cathode Materials from Spent Lithium–ion Batteries

Recovery of critical metals from spent Li-ion batteries: Sequential leaching, precipitation, and cobalt–nickel separation using Cyphos IL104

Ascorbic-acid-assisted Recovery of Cobalt and Lithium from Spent Li-ion Batteries

Recycling of Cobalt Oxides Electrodes from Spent Lithium-Ion Batteries by Electrochemical Method

Recycling lithium cobalt oxide from its spent batteries: An electrochemical approach combining extraction and synthesis

Recycling of spent LiCoO2 materials by electrolytic leaching of cathode electrode plate