Abstract:Oceanic cobalt‐rich crusts contain many valuable metals including Co, Ni, Cu, and Mn, of which Co and Ni are scarce metal resources on terrestrial land. Co, Ni, Cu, and Mn in cobalt‐rich crusts can be efficiently extracted by the ammonium sulfate roasting‐water leaching (ARWL) process, but separating and recovering Co and Ni from the leaching solution containing high concentrations of Mn is a challenging problem. In this study, a combination of sulfide precipitation and P507–Cyanex 272 synergistic extraction is proposed for the separation and recovery of Co and Ni from the ARWL solutions of oceanic cobalt‐rich crusts. Under the optimum sulfide precipitation conditions, Co and Ni were precipitated with 99.85% and 99.63% efficiency, respectively, while Mn was coprecipitated with only .79% efficiency. The Co–Ni mixed sulfides were dissolved by dilute sulfuric acid under oxidative conditions to obtain a solution containing 12.584 g/L Co, 11.012 g/L Ni, and a small amount of Mn. Subsequently, Co and Mn were extracted from this solution using P507–Cyanex 272 synergistic extraction, the single‐stage extraction efficiencies of Co and Mn were 95.76% and 99.73%, respectively, and the coextraction efficiency of Ni was 3.02%, under the conditions of a feed solution pH of 3.0, an extractant saponification degree of 70%, a total extractant concentration of 20% (P507 to Cyanex 272 ratio of 3:7), and an O/A ratio of 1.1:1. The results of the thermodynamic study showed that the reaction of Co extraction by this mixed extraction system was exothermic. Ni in the organic phase was washed with an H2SO4 concentration of .12 mol/L, followed by stripping of Co and Mn with an H2SO4 concentration of .6 mol/L. Mn in the stripping solution was removed by oxidative precipitation with (NH4)2S2O8, after which the Co3O4 product was obtained by precipitation with (NH4)2C2O4 and calcination. Similarly, NiC2O4·2H2O can be obtained from the raffinate by (NH4)2C2O4 precipitation. Finally, a flowsheet was developed for the separation and recovery of Co, Ni, Cu, and Mn from the ARWL solutions of oceanic cobalt‐rich crusts. The study provides a promising scheme for the recovery of various valuable metals from deep‐sea cobalt‐rich crusts or manganese nodules.

Comprehensive Recovery of Ni-Co from Low Grade Manganese Oxide Ore

Recovering Ni and Co from reduced manganese oxide ore by biomass

A feasible process for recycling valuable metals from LiNi0.5Co0.2Mn0.3O2 cathode materials of spent Li-ion batteries

Separation and Recovery of Iron and Nickel from Low-Grade Laterite Nickel Ore by Microwave Carbothermic Reduction Roasting

Efficient separation and recovery of Co and Ni from ammonium sulfate roasting‐water leaching solutions of oceanic cobalt‐rich crusts by sulfide precipitation and P507–Cyanex 272 synergistic extraction

Recovery of Pure Co(II) and Ni(II) Solutions from Synthetic Sulfate Leach Liquor of Laterite Ores by Precipitation and Solvent Extraction

Study of Extraction and Purification of Ni, Co and Mn from Spent Battery Material

Green and Efficient Utilization of Ferruginous Gibbsite Ore and Ferruginous Manganese Ore by Synergetic Carbothermic Co-Reduction–Magnetic Separation Process

Reduction of Low-Grade Manganese Oxide Ore by Biomass Roasting

Study on the high-efficiency separation of Fe and Mn from low-grade pyrolusite and the preparation of LiMn2O4 materials for lithium-ion batteries

Recovery of Copper and Cobalt from Low-Grade Heterogenite with Reductive Acid Leaching Method

Solvent Extraction of Ni and Co from the Phosphoric Acid Leaching Solution of Laterite Ore by P204 and P507

An Environmentally Friendly Approach for the Extraction and Recovery of Mn from Pyrolusite by Ammonium Sulfate Roasting‐water Leaching and Ammonium Carbonate Precipitation

Manganese ion oxidation precipitation method for the recycling and reusing of LiNi<sub>0.8</sub>Co<sub>0.05</sub>Mn<sub>0.15</sub>O<sub>2</sub> materials for lithium-ion batteries

Recovery of high-purity metallic cobalt from lithium nickel manganese cobalt oxide (NMC)-type Li-ion battery

Solvent extraction-based recovery of Co from leach solutions of Cu Co ores using a Mextral 6103H-naphthenic acid- isooctanol system

Study on the reduction roasting of spent LiNixCoyMnzO2 lithium-ion battery cathode materials

Selective extraction performance of Ni, Cu, Co, and Mn adopted by a coupled leaching of low-grade Ni-sulfide ore and polymetallic Mn-oxide ore in sulphuric acid solutions

Differential Removal of Copper and Iron from Acidic Polymetallic Aqueous Solutions

Eco-friendly and selective separation of nickel and copper from low-grade nickel sulfide ore via sulfur fixation roasting with MgCO 3 followed by sulfuric acid leaching

Extraction of Valuable Metals from Waste Battery Material