Abstract:The carrier material Ce0.65Zr0.35O2 was prepared by the co-precipitation method and a series of Ce0.65Zr0.35O2-based monolith catalysts containing W, Fe or Cu were prepared for selective catalytic reduction (SCR) of NOx with NH3. The catalysts were characterized by ammonia oxidation, N2 adsorption-desorption, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and NH3 temperature-programmed desorption (NH3-TPD). Catalytic activity tests reveal that catalyst WO3/Ce0.65Zr0.35O2 has the best catalytic activity and a good resistance to hydrothermal aging. It is light-off at 200 degrees C and has the highest NOx conversion of 96% at 350 degrees C. The reaction window of 80% NOx conversion is in the temperature range of 241-457 degrees C with a gas hourly space velocity (GHSV) of 30,000 h(-1). Moreover, it has a good SO2 tolerance and good ability to fit the high GHSV, which suggests that it has a good prospect for real application. Characterization experiments show that WO3/Ce0.65Zr0.35O2 has a weaker property of ammonia oxidation, a larger surface area, strong oxidation property with the highest binding energy of Ce, Zr and O, and the most surface medium-strength acid. These characteristics are the main factors that lead to the increased SCR activity. (C) 2014 The Institution of Chemical Engineers. Published by Elsevier B.V. All rights reserved.

Selective Catalytic Reduction of NO with NH3 on Modified ZrO2-MnO2 Monolithic Catalysts

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Monolith Ce0.65zr0.35o2-Based Catalysts for Selective Catalytic Reduction of No with Nh3

Selective catalytic reduction of NOx with NH3 over Mn–Zr–Ti mixed oxide catalysts

Selective Catalytic Reduction of No with Nh3 over Mnox-Ceo2-Wo3-Zro2: Effect of Calcination Temperature

Novel MoO3/CeO2–ZrO2 Catalyst for the Selective Catalytic Reduction of NOx by NH3

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

Activity and Hydrothermal Stability of CeO_2–ZrO_2–WO_3 for the Selective Catalytic Reduction of NO_x with NH_3

Preparation of Cr-Mn Mixed Oxide by Coprecipitation and Its Performance for Low-Temperature Selective Catalytic Reduction of NOx

CeO2 Nanoparticle-Loaded MnO2 Nanoflowers for Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Selective catalytic reduction of NOx with NH3 by monolithic catalyst MnOx/AC/C under low temperature in the presence of excess O2

Cr–MnO Mixed-Oxide Catalysts for Selective Catalytic Reduction of NO with NH3 at Low Temperature

Ceria modified MnOx/TiO2 as a superior catalyst for NO reduction with NH3 at low-temperature

Nb-modified Mn/Ce/Ti Catalyst for the Selective Catalytic Reduction of NO with NH3 at Low Temperature

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Si-modified Mn-Ce oxide catalyst for selective catalytic reduction of NOx with NH3 at low temperature

CeO2-WO3 catalysts for the selective catalytic reduction of NOx with NH3: effect of the amount of WO3

Novel Mn-Ce-Ti Mixed-Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH₃.

Selective Catalytic Reduction Of Nox With Nh3 At Low Temperatures Over Metal Oxide Supported On Ac-C Cellular Monoliths

Characterization of CeO2–WO3 Catalysts Prepared by Different Methods for Selective Catalytic Reduction of NOx with NH3