Abstract:In this study, anatase TiO2-supported cerium, manganese, and ruthenium mixed oxides (CeOx–MnOx–RuOx/TiO2; CMRT catalysts) were synthesized at different calcination temperatures via conventional impregnation methods and used for selective catalytic reduction (SCR) of NOx with NH3. The effect of calcination temperature on the structure, redox properties, activation performance, surface-acidity properties, and catalytic properties of the CMRT catalysts was investigated. The results show that the CMRT catalyst calcined at 350 °C exhibits the most efficient low-temperature (<120 °C) denitration activity. Moreover, the selective catalytic oxidation (SCO) reaction of ammonia is intensified when the reaction temperature is >200 °C, which leads to a decrease in the N2 selectivity of the CMRT catalysts and further results in an increase in the production of NO and N2O byproducts. X-ray photoelectron spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy show that the CMRT catalyst calcined at 350 °C contains more Ce4+, Mn4+, Ru4+, and lattice oxygen, which greatly improve the catalyst's ability to activate NO that promotes the NH3-SCR reaction. The Run+ sites of the CMRT catalyst calcined at 250 °C are the competitive adsorption sites of NO and NH3 molecules, while those of the CMRT catalyst calcined at 350 and 450 °C are active sites. Both the Langmuir–Hinshelwood (L–H) mechanism and the Eley–Rideal (E–R) mechanism occur on the surface of the CMRT catalyst at the low reaction temperature (100 °C).This article has not yet been cited by other publications.

Selective Catalytic Reduction of No with Nh3 over Mnox-Ceo2-Wo3-Zro2: Effect of Calcination Temperature

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Effect of Calcination Temperature on the Activation Performance and Reaction Mechanism of Ce–Mn–Ru/TiO 2 Catalysts for Selective Catalytic Reduction of NO with NH 3

Influence of Calcination Temperature over Vanadium–Molybdenum Catalysts for the Selective Catalytic Reduction of NO x with NH 3

Low Temperature Selective Catalytic Reduction of NOx with NH3 over Amorphous MnOx Catalysts Prepared by Three Methods

Selective Catalytic Reduction of NO<sub>X</sub> on Cr-Mn Mixed Oxide at Low Temperature

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Influence of Calcination Temperature on Fe/Hbea Catalyst for the Selective Catalytic Reduction of Nox with Nh3

Low Temperature Selective Catalytic Reduction Of No With Nh3 Over Mn-Fe Spinel: Performance, Mechanism And Kinetic Study

Optimization of catalytic activity of MnCoOx catalyst for NH3–SCR at low temperature by response surface method

Low-temperature Selective Catalytic Reduction of NO with NH3 over MnCe Oxides Supported on TiO2 and Al2O3: A Comparative Study

Modification of MnCo₂Oₓ Catalysts by NbOₓ for Low Temperature Selective Catalytic Reduction of NO with NH₃

Selective catalytic reduction of NOx with NH3 by monolithic catalyst MnOx/AC/C under low temperature in the presence of excess O2

Novel Mnox Catalyst for Low-Temperature Selective Catalytic Reduction of Nox with Nh3

Selective catalytic reduction of NOx with NH3 over Mn–Zr–Ti mixed oxide catalysts

Tailored temperature window of MnOx-CeO2 SCR catalyst by addition of acidic metal oxides

Selective Catalytic Reduction Of Nox With Nh3 At Low Temperatures Over Metal Oxide Supported On Ac-C Cellular Monoliths

Optimization of Robust FeMnSmO x Catalyst for Low-Temperature (<150 °C) NH 3 –SCR of NO x

Investigation and Characterization on MnO_x/TiO_2 for Low-Temperature Selective Catalytic Reduction of NO_x with NH_3