Abstract:Low-temperature selective catalytic reduction (SCR) is an economical and feasible technology to effectively reduce NOx emissions from combustion sources. However, low-temperature SCR still suffers from low activity and SO2/H2O poisoning of catalysts. Here, a strategy to promote SCR activity and anti-poisoning ability was proposed through enhancing the metal–metal interaction. Ternary ferrite spinel material (CuMnFeO4) with a stronger metal–metal interaction was synthesized through incorporating Mn cations into the tetrahedral sites of CuFe2O4 spinel. CuMnFeO4 spinel mainly exists in an amorphous form and shows good SCR performance and SO2/H2O anti-poisoning ability in the temperature window of 200–350 °C. Density functional theory calculations were used to investigate the atomic-level reaction mechanism of NO reduction. Theoretical results indicate that NO and NH3 adsorptions over the CuMnFeO4 catalyst are controlled by the chemisorption mechanism. The interaction between reactants (NO and NH3) and the CuMnFeO4 surface is closely associated with the orbital hybridization of N and Fe atoms. The SCR reaction of NO with NH3 over the CuMnFeO4 catalyst is governed by a six-step process (NO → NO* → H2NNO* → HNHNO* → HNNOH* → N2* → N2), in which the first H-transfer reaction (H2NNO* → HNHNO*) presents the highest activation energy barrier of 230.84 kJ/mol and is the rate-determining step of the NH3-SCR reaction. Finally, a SCR cycle reaction scheme was proposed to understand the reaction process of NO reduction over CuMnFeO4 spinel.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c02293?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c02293</a>.BET surface area and average pore diameter of different catalysts (Table S1), schematic diagram of the experimental system for NO reduction (Figure S1), and crystal structure of CuMnFeO4 spinel, octahedral Cu2+ cation, tetrahedral Mn3+ cation, octahedral Fe3+ cation, and CuMnFeO4(100) surface (Figure S2) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c02293/suppl_file/ef0c02293_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Low Temperature Selective Catalytic Reduction Of No With Nh3 Over Mn-Fe Spinel: Performance, Mechanism And Kinetic Study

Low-Temperature Selective Catalytic Reduction of NOx with NH3 over Fe–Mn Mixed-Oxide Catalysts Containing Fe3Mn3O8 Phase

Low-Temperature Selective Catalytic Reduction of NO with NH3 over Mn2O3-Doped Fe2O3 Hexagonal Microsheets

Mechanism of N2o Formation During the Low-Temperature Selective Catalytic Reduction of No with Nh3 over Mn-Fe Spinel

Fe-Mn/Al2O3 Catalysts for Low Temperature Selective Catalytic Reduction of NO with NH3

In Situ DRIFTS Study of the Mechanism of Low Temperature Selective Catalytic Reduction over Manganese-Iron Oxides

Enhancement of Low-Temperature Catalytic Activity over a Highly Dispersed Fe–Mn/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3

Selective Catalytic Reduction of NOx with NH3 over Fe Modified MOF-Derived MnOx Catalyst

Ni-Mn Bi-Metal Oxide Catalysts for the Low Temperature SCR Removal of NO with NH3

Metal–Metal Interactions of Ternary Spinel for Efficient NH 3 Selective Catalytic Reduction of NO x at a Low Temperature

Low-temperature selective catalytic reduction of NO with NH3 over MnOx-CeO2/ZrO2-TiO2 monolith catalyst

Low-Temperature Selective Catalytic Reduction of NO With NH_3 Over Iron Based Catalysts

A novel high activity MnXFe3−XO4 spinel catalyst for selective catalytic reduction of NO using NH3 prepared by a short process from natural minerals for low-temperature sintering flue gas: Effect of X value on catalytic mechanism

Highly dispersed MnOx-FeO(x)supported by silicalite-1 for the selective catalytic reduction of NO(x)with NH(3)at low temperatures

In Situ FT-IR Study of Highly Dispersed MnO X /SAPO-34 Catalyst for Low-Temperature Selective Catalytic Reduction of NO X by NH 3

The role of NH3 in the low-temperature selective catalytic reduction of NO over MnOx/TiO2

Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

Low-Temperature Selective Catalytic Reduction of NO with NH3 Over Mn–Ti Oxide Catalyst: Effect of the Synthesis Conditions

Metal–Metal Interactions of Ternary Spinel for Efficient NH3 Selective Catalytic Reduction of NOx at a Low Temperature

MnOx-Decorated Fe–Zr-Based Nano-Catalysts for Low-Temperature NH3-SCR: Improvement of Catalytic Activity

Sm-MnOx Catalysts for Low-Temperature Selective Catalytic Reduction of NOx with NH3:Effect of Precipitation Agent