Abstract:A novel flower-like 0.1%WO3/CeO2(f) catalyst with high-efficiency was fabricated for the selective reduction of NOx by NH3. In contrast to traditional WO3/CeO2, this catalyst exhibited a significant SCR performance of 90% NOx conversion and 95% N2 selectivity within a wide temperature range of 175-450.C and great H2O and/or SO2 resistance under a high GHSV of 177,000 h 1. A variety of analytical techniques including SEM, XRD, XPS, NH3-TPD, H2-TPR and in situ DRIFTS-MS were employed for the catalysts characterization to fully understand the reaction mechanism over WO3/CeO2 catalysts. It was found that the flower-like structure promoted a more uniform dispersion of tungsten species on the support and a stronger interaction between WO3 and CeO2, thereby increasing the acid sites and surface vacancies. Moreover, more chemical active oxygen and trivalent cerium species were presented on 0.1% WO3/CeO2(f). In situ DRIFTS-MS and H2-TPR revealed that the reducibility was optimized for 0.1% WO3/CeO2(f). Then NH3 oxidation species could react with gaseous or adsorbed NOx during Eley-Rideal (E-R) pathway for 0.1%WO3/CeO2(f) at a high temperature (300. C). Meanwhile, NOx was reduced into more active bridged nitrates participating in the reaction via Langmuir-Hinshelwood (L-H) route, contributing to its superior deNOx performance. In comparison, the formation of inert adsorbed NH3 oxidization/ deformation species and bridged nitrates suppressed the SCR reaction over 0.1%WO3/CeO2, resulting in its inferior deNOx activity. This study not only provides a new strategy for developing high-efficiency ceria supported NH3-SCR catalyst, but also lays a foundation for investigating the reaction mechanism of cerium-based catalyst for further practical applications.

Characterization of CeO2–WO3 Catalysts Prepared by Different Methods for Selective Catalytic Reduction of NOx with NH3

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

CeO 2 –WO 3 Mixed Oxides for the Selective Catalytic Reduction of NO X by NH 3 over a Wide Temperature Range

Preparation and characterization of CeO2/TiO2 catalysts for selective catalytic reduction of NO with NH3

CeO2-WO3 catalysts for the selective catalytic reduction of NOx with NH3: effect of the amount of WO3

Low-temperature selective catalytic reduction of NO on CeO2-CuO/Al2O3 catalysts prepared by different methods

A Superior Cerium-Tungsten Bimetal Oxide Catalyst with Flower-Like Structure for Selective Catalytic Reduction of NO by NH3

The activity and characterization of CeO2-TiO2 catalysts prepared by the sol-gel method for selective catalytic reduction of NO with NH3.

Effects of WO3 and SiO2 Doping on CeO2–TiO2 Catalysts for Selective Catalytic Reduction of NO with Ammonia

Mechanism of Selective Catalytic Reduction of NOx with NH3 over CeO2-WO3 Catalysts

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3

Effect of Synthesis Methods on Activity of V2O5/CeO2/WO3-TiO2 Catalyst for Selective Catalytic Reduction of NOx with NH3

Activity and Characterization of Ce–Mo–Ti Mixed Oxide Catalysts Prepared by a Homogeneous Precipitation Method for Selective Catalytic Reduction of NO with NH3

Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia

Effects of WOx Modification on the Activity, Adsorption and Redox Properties of CeO2 Catalyst for NOx Reduction with Ammonia

Synergistic Effect Between Ceria and Tungsten Oxide on WO3–CeO2–TiO2 Catalysts for NH3-SCR Reaction

DRIFT Study on Cerium−Tungsten/Titiania Catalyst for Selective Catalytic Reduction of NOx with NH3

Influence of CeO2 morphology on WO3/CeO2 catalyzed NO selective catalytic reduction by NH3

Low-temperature Activity and Mechanism of WO3-modified CeO2-TiO2 Catalyst under NH3-NO/NO2 SCR Conditions

The Superior Performance of Sol–Gel Made Ce–O–P Catalyst for Selective Catalytic Reduction of NO with NH3

Modification of Cu/ZSM-5 Catalyst with CeO2 for Selective Catalytic Reduction of NOx with Ammonia