Abstract:BACKGROUND The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3-SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. RESULTS A series of Mn-Ce-Co-x/Ti-C,N catalysts were prepared by the impregnation method, and low-temperature NH3-SCR was studied. The results show that support modification (Ti-C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn-Ce/TiO2 catalyst, 160-320 degrees C; Mn-Ce/Ti-C,N catalyst, 140-320 degrees C). The doping of Co further improves the low-temperature NH3-SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 degrees C. CONCLUSION Temperature-programmed reduction (H-2-TPR) and temperature-programmed desorption (NH3-TPD) results showed that Ti-C,N can improve the redox ability but reduces the surface acidity. Co-doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co-doping is beneficial to the optimal catalytic activity of Mn-Ce-Co-0.05/Ti-C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low-temperature NH3-SCR through the 'fast SCR' pathway. X-ray photoelectron spectroscopy results of the highest chemisorbed oxygen (O-alpha) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir-Hinshelwood (L-H) and Eley-Rideal (E-R) mechanisms occurred in the NH3-SCR reaction over the Mn-Ce-Co-0.05/Ti-C,N catalyst. (c) 2021 Society of Chemical Industry

Low-temperature Activity and Mechanism of WO3-modified CeO2-TiO2 Catalyst under NH3-NO/NO2 SCR Conditions

Synergistic Effect Between Ceria and Tungsten Oxide on WO3–CeO2–TiO2 Catalysts for NH3-SCR Reaction

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Ultra Hydrothermal Stability of CeO2-WO3/TiO2 for NH3-SCR of NO Compared to Traditional V2O5-WO3/TiO2 Catalyst

Activation of Fast Selective Catalytic Reduction of NO by NH3 at Low Temperature over TiO2 Modified CuOX-CeOX Composites

Effects of WO3 and SiO2 Doping on CeO2–TiO2 Catalysts for Selective Catalytic Reduction of NO with Ammonia

V2O5-WO3/TiO2 Catalysts for Low Temperature NH3 SCR: Catalytic Activity and Characterization

Effect of Synthesis Methods on Activity of V2O5/CeO2/WO3-TiO2 Catalyst for Selective Catalytic Reduction of NOx with NH3

Low-temperature SCR Activity and SO2 Deactivation Mechanism of Ce-modified V2O5–WO3/TiO2 Catalyst

Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia

DRIFT Study on Cerium−Tungsten/Titiania Catalyst for Selective Catalytic Reduction of NOx with NH3

V<sub>2</sub>O<sub>5</sub>-WO<sub>3</sub>/TiO<sub>2</sub> Catalysts for Low Temperature NH<sub>3</sub> SCR: Catalytic Activity and Characterization

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3

The Effective Promotion of Trace Amount of Cu on Ce/WO3‐ZrO2‐TiO2 Monolithic Catalyst for the Low‐temperature NH3‐SCR of NOx

CeO 2 –WO 3 Mixed Oxides for the Selective Catalytic Reduction of NO X by NH 3 over a Wide Temperature Range

Ceria-modified WO3-TiO2-SiO2 Monolithic Catalyst for High-Temperature NH3-SCR

Characterization of CeO2–WO3 Catalysts Prepared by Different Methods for Selective Catalytic Reduction of NOx with NH3

Effect of Ce Doping of TiO2 Support on NH3-SCR Activity over V2O5–WO3/CeO2–TiO2 Catalyst

Ce and Zr Modified WO3-TiO2 Catalysts for Selective Catalytic Reduction of NOx by NH3

CeO2-WO3 catalysts for the selective catalytic reduction of NOx with NH3: effect of the amount of WO3

Mechanism of Selective Catalytic Reduction of NOx with NH3 over CeO2-WO3 Catalysts