Abstract:This study presents preparing and characterization of polyacrylonitrile (PAN) fibers containing various content of tetraethoxysilane (TEOS) incorporated via mutual spinning solution or emulsion using wet and mechanotropic spinning methods. It was shown that the presence of TEOS in dopes does not affect their rheological properties. The coagulation kinetics of complex PAN solution was investigated by optical methods on the solution drop. It was shown that during the interdiffusion process phase separation occurs and TEOS droplets form and move in the middle of the dope's drop. Mechanotropic spinning induces the TEOS droplets to move to the fiber periphery. The morphology and structure of the fibers obtained were investigated by scanning and transmission electron microscopy, as well as X-ray diffraction methods. It was shown that during fiber spinning stages the transformation of the TEOS drops into solid silica particles takes place as a result of hydrolytic polycondensation. This process can be characterized as the sol-gel synthesis. The formation of nano-sized (3-30 nm) silica particles proceeds without particles aggregation, but in a mode of the distribution gradient along the fiber cross-section leading to the accumulation of the silica particles either in the fiber center (wet spinning) or in the fiber periphery (mechanotropic spinning). The prepared composite fibers were carbonized and according to XRD analysis of carbon fibers, the clear peaks corresponding to SiC were observed. These findings indicate the useful role of TEOS as a precursor agent for both, silica in PAN fibers and silicon carbide in carbon fibers that has potential applications in some advanced materials with high thermal properties.

Preparation and Characterization of Silica Fibers Via Sol-gel Method

Mesoporous Silica Fibers Prepared by Electroblowing of A Poly(Methyl Methacrylate)/Tetraethoxysilane Mixture in N,N-Dimethylformamide

CHARACTERIZATION OF SiO2 AEROGELS/FIBER COMPOSITES PREPARED BY THE SOL-GEL METHODS

Synthesis and characterization of sol-gel derived continuous spinning alumina based fibers with silica nano-powders

Preparation and Characteristics of Spinnable Sol and Continuous Mullite Fibers with Nano Silica Addition

Facile Synthesis Via Electrospinning of a Tetraethoxysilane/Polyvinylpyrrolidone Sol and Characterization of Ultrafine Crystalline SiO2 Nanofibers

STUDY ON THE PREPARATION TECHNIQUE OF SiO2 AEROGELS/FIBER COMPOSITES

Spinnability and Crystallizability of Silica Glass Fiber by the Sol–gel Method

Preparation and Characterization of Hydrophobic Silica Aerogels Doped with Fibers

PREPARATION OF SILICA AEROGELS BY SUPERCRITICAL DRYING TECHNIQUE

Study On Preparation Of Sio2 Optical Fiber Preform By Sg Method

Polyacrylonitrile Fibers with a Gradient Silica Distribution as Precursors of Carbon-Silicon-Carbide Fibers

Preparation and Characterization of Polyester/Silica Nanocomposite Resins

Mullite Fibers Prepared by Sol-Gel Method Using Aluminum Chloride Aluminum Isopropoxide and Tetraethylorthosilicate

Synthesis on microcosmic structural characterization of precursors gels of the continuous Al2O3-SiO2 fiber

Preparation and Characterization of 8mol％ Yttria-stabilized ZrO2 (8YSZ) Fibers Prepared by Sol-Gel Method

Preparation of Stable Alumina-silica Sol and Its Application in Mullite Fiber

Preparation and Characterization of Monolithic Silica Fiber/Al2O3 Aerogel Composites by Non-Supercritical Drying

Preparation and Application of Spinnable Zirconium Sol I.Preparation of Continuous Zirconia Fiber

The characteristics of spinnable mullite sol prepared by sol-gel method

Preparation, Characterization and Mechanical Properties of Continuous Mullite Fibers Derived from the Diphasic Sol-Gel Route