Experimental study of the static behavior of tubular N-joints
Zilin Li,Liangqin Wu,Bin Zhu,Qinghua Han
DOI: https://doi.org/10.3321/j.issn:1000-131X.2008.07.008
2008-01-01
Abstract:An experimental study was carried out on a tubular N-joint, a plate reinforced tubular N-joint, a concrete filled tubular N-joint, and a N-joint reinforced by concrete and plate under the axial compression of brace and chord. Test results, including the failure modes, the relationship between load in the compressive brace and deformation in the tubular wall of chord, the equivalent stress distribution in tubular wall of the chord and the ultimate capacity, were compared between the four joints, which indicates that different reinforcement methods can lead to different failure modes, the ultimate capacity of the joints can be remarkably enhanced by filling concrete in chord and can be only enhanced to a certain extent by welding a reinforce plate on the tubular wall of the chord, while welding a reinforcement plate on the tubular wall of the chord may weaken the ultimate capacity of the joint when the radial stiffness of the chord is sufficient. Nonlinear finite element analysis of the experimental joints was conducted. The failure mode, the ultimate capacity, and the full loading-displacement path were obtained and compared with the experimental results, and there was a good agreement between the experimental and the numerical results.