Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental Investigation of X-joint in Double-Arch Structure

Experimental study of the static behavior of tubular N-joints

Cyclic Behavior Test of a New Double-Arch Steel Gate

EXPERIMENTAL RESEARCH AND FINITE ELEMENT ANALYSIS ON A WELDED JOINT WITH TUBES INTERSECTED AT TWO DIFFERENT POINTS

Model Test of Double-Arch Gate with Tubular Structure

Experimental research and finite element analysis on tubular joints of Hangzhou East Railway Station

Application and study of a steel tubular double-arch lock

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

STUDY FOR IN-PLANE ULTIMATE STRENGTH OF STEEL CIRCULAR ARCHES WITH HORIZONTAL SPRING SUPPORTS

Experimental Study on the Load Bearing Capacity of a New Style Joint Between the Cable and Concrete Filled Tubular Arch Bridge

Stress Performance Analysis of Special-shaped Arch Bridge with Longitudinal Linkage

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Multi-rib Arch Bridge Strengthened by Stayed-Cable and Field Test

Experimental Study on the Axial Compressive Strength of Vertical Inner Plate Reinforced Square Hollow Section T-joints

Reinforced Concrete Multi-Rib Arch Bridge Strengthened by Changing Structural System

Test & Study of Structural Properties of High RCC Arch Dam with Different Joint Formations

Experimental Investigation into Flexural-Torsional Ultimate Resistance of Steel Circular Arches

Experimental investigation on cable-strut arch structures

Experimental study on the connection performance of single taper sleeve locking-type joint

Full-scale experimental research on tubular N-joints of square chords with circular braces

Innovative Technique for Strengthening Steel Frame Articulated Joints in Restricted Conditions