Abstract:In view of the decreasing trend of column widths in steel residential buildings, a new type of concrete filled rectangular steel tubular column-H-section steel beam connections with external stiffeners is proposed. The diaphragm is removed in this connection. Pseudo-static tests of seven new joint specimens were carried out. The test parameters were the section of the steel beam and the thickness and the height of the long side of the external stiffeners. The failure modes, hysteretic curves, skeleton curves, strength, stiffness degradation, strength degradation, ductility and energy dissipation capacity of the joints were studied. The test results show that there were three failure modes of this new joint, namely, tensile failure of beam flange, weld failure between beam flange and external stiffener, and column wall failure near the external stiffener. The ductility coefficient was 2.17 to 3.67, the equivalent viscous damping coefficient was 0.2 to 0.3, and the average drift ratio was 1/49. The seismic performance of the joint met the requirements of strong joints and weak members. Increasing the thickness or the height of the long side of the external stiffeners can increase the strengths of the joints. The premature cracking of the beam flange, the welding seam between beam flange and external stiffener, or the column wall will reduce the ductility and energy dissipation capacity of the joints. It is proposed that the connection coefficient should be 1.4 when checking the ultimate strength of the column wall and joint weld. The strengthening or weakening measures on the flange at the beam ends can be taken to ensure that the new joints have a sufficient plastic deformation capacity.

THE EFFECTS OF SEMI-RIGID JOINTS ON THE SEISMIC BEHAVIORS OF STEEL STRUCUTURE

Effects of Semi-rigid Joints of Steel Frames on Natural Vibration Period of Structures

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Effect of Joint Stiffness on Dynamic Behaviors and Seismic Properties of Two-Dimensional Multistory Steel Frames

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

The Effect of Joint Stiffness on Static Capability of Multistory Steel Frames

Effects of Joint's Rigidity on the Capacity of Gabled Frames

STUDIES ON THE ASEISMIC PERFORMANCE OF HIGH RISE STEEL STRUCTURES WITH NEW BEAM-COLUMN JOINTS DISSIPATING SEISMIC ENERGY

Analysis of Influence of Composite Joint Rigidity on Seismic Properties of the Steel-concrete Composite Frame

Analysis on dynamic eccentricity effect and torsional performance of steel reinforced concrete frame with special-shaped column

Seismic Behavior of Suspended Building Structures with Semi-Rigid Connections

Elastic Time-history Analysis of Multi-story Steel Frame with Semirigid End-plate Conections in Earthquake Response

STUDY ON DYNAMIC CHARACTERISTIC OF THE STEEL FRAMES WITH SEMI-RIGID CONNECTION OF TOP AND SEAT ANGLES WITH DOUBLE WEB ANGLE

Pseudo-Dynamic Test of Steel Frames with Semi-Rigid Connections

An Investigation of the Effect of Semi-rigid Connections on Sudden Column Removal in Steel Frames

Numerical Simulation and Experimental Analysis on Steel Semi-Rigid Joints

Analysis of Composite Beam Rigidity Influencing Seismic Properties of Composite Frame

Effect of vertical stiffeners on the seismic performance of T‐shaped CFST column to steel beam joint

Experimental and Numerical Study of Unstiffened Steel Plate Shear Wall Structures

Study on Dynamic Characteristics of Semi-rigid Steel Frames