Abstract:The steel Moment-Resisting Frame has been widely used in multi-storey and high-rise constructions, as it has many advantages over common structures, such as better aesthetics, better seismic performances with less weight and easy assemblage, etc. In the Northridge earthquake (1994) and the Kobe earthquake (1995), widespread and unpredicted brittle fractures were. found in welded steel beam-column connections. Research on seismic behaviors of beam-column connections became a worldwide research spot. This paper introduces the main research results on steel beam-column connections of the Research Section of Steel Structures and Glass Buildings of Tsinghua University during the last decade, including experimental studies and design suggestions on pure steel beam-column joints and composite joints.(1) In this paper, a series of 8 specimens containing 4types of connections such as dog-bone type, long slot type and enlarged-access-hole connections were tested by cyclic loads. The affects of the connection details were analyzed, and the seismic behaviors of these joints were studied based on tests.(2) In this paper, 8 Welded-Flange-Bolted-Web (WFBW) specimens with 4 types of access holes were tested by cyclic loads. The seismic behaviors of connections and the influences of access holes were analyzed, and some structural requirements were proposed.(3) A test of 4 composite joints with different access holes and reinforcement ratios under cyclic loading was conducted to investigate the moment resistances and seismic behaviors of composite joints. The failure modes and ductility characters of these specimens were concluded and the test results were compared with pure steel connections. The connection stiffness degradation and the energy dissipation capacity were also discussed. At last the design suggestion of the composite joints was proposed.(4) Another test of four composite joints with different reinforcement ratios and loading types was conducted in this paper. This test focused on the affects of material and loading types.Generally, these tests and the design theories provide an in-depth sight into the studies and design methodologies of the steel and composite connections. It will promote the use of the steel structures and composite structures in our nation.

STUDIES ON THE ASEISMIC PERFORMANCE OF HIGH RISE STEEL STRUCTURES WITH NEW BEAM-COLUMN JOINTS DISSIPATING SEISMIC ENERGY

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

JOINTS OF MULTI-STORY SPANNED DIAGONAL BRACING SYSTEM IN TALL STEEL BUILDINGS: ANALYSIS AND DESIGN METHOD

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Static and Seismic Experimental Study of Novel Prefabricated Beam-Column Joints with Elongated-Hole Brackets

Seismic behaviour of steel beam to circular CFST column assemblies with external diaphragms

Development of a double-stage-yield dissipative beam-to-column joint: Experimental study and application for structural response control

Experimental study on the seismic behavior of an innovative stepped beam-column joint

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Seismic Performance Analysis of Fabricated Concrete Beam-Column Joints Based on Intelligent Finite Element Analysis

Numerical simulation and seismic performance analysis of sacrificial-energy dissipation beam-column joint

Experimental study on seismic behaviors of energy-dissipated braced frame structure with concrete-filled rectangular steel tubular columns and steel beams

Application of seismic resilient energy-dissipative rocking columns with HSS tension braces in steel frames

Experimental study and numerical analysis on seismic performance of steel beam‐column damping joint in Chinese traditional style buildings

Seismic behavior of reduced beam section joints considering concrete floor effect

Experimental and numerical investigation of the hysteretic behavior of reinforced concrete column-steel beam interior joints under low seismic intensity levels

Recent Experimental Research Advances On The Seismic Performance Of Joints In Multi-Storey And High-Rise Steel Structures

Seismic Performance of Concrete-Filled Square Steel Tubular Column-Steel Beam Sleeve Joint

An experimental study on the seismic performance of beam-column joints in steel frames with the effect of concrete slabs considered

The Hysteresis Behavior of Steel Beam–Column Joint with the Load Bearing-Energy Dissipation Connection for Converter Station Building