Application of seismic resilient energy-dissipative rocking columns with HSS tension braces in steel frames

Yan-Wen Li,Yuan-Zuo Wang,Yan-Bo Wang

DOI: https://doi.org/10.1016/j.engstruct.2021.113812

IF: 5.582

2022-02-01

Engineering Structures

Abstract:Steel moment resisting frames are widely used as seismic resisting systems of buildings in earthquake regions. Since their satisfactory performance is achieved by developing plastic deformation in critical regions, it usually leads to inter-storey drift concentration during a strong earthquake and significant residual deformation after a strong earthquake. To mitigate seismic damage concentration and excessive residual deformation, this study proposed a high post-yield stiffness rocking system, namely energy-dissipative rocking columns with high strength steel tension braces (EDR-TB). The study commenced with lateral cyclic loading tests on the proposed EDR-TB column. Subsequently, numerical model of the EDR-TB was built and validated against test results. System-level nonlinear static and time-history analysis were then conducted on the steel frame with various layouts of the EDR-TB columns. Compared with a conventional steel frame, the frame with EDR-TB columns exhibited much reduced maximum and residual drifts. In addition, the frame with EDR-TB columns exhibited more uniform distribution of drifts. The results also reveal that an appropriate arrangement of lateral resisting capacity of the EDR-TB columns over the structural height may achieve an enhanced seismic performance of the whole structures.

engineering, civil