Abstract:Earthquake-induced building collapse and progressive collapse due to accidental local failure of vertical components are the two most common failure modes of reinforced concrete (RC) frame structures. Conventional design methods usually focus on the design requirements of a specific hazard but neglect the interactions between different designs. For example, the progressive collapse design of an RC frame often yields increased reinforcement and flexural strength of the beams. As a result, the seismic design principle of "strong-column-weak-beam" may be violated, which may lead to unfavorable failure modes and weaken the seismic performance. To avoid these adverse effects of the progressive collapse design on the seismic resistance of RC frames, a novel structural detailing is proposed in this study. The proposed detailing technique intends to concurrently improve the seismic and progressive collapse performances of an RC frame by changing the layout of the newly added longitudinal reinforcement against progressive collapse without introducing any additional reinforcement. A six-story RC frame is used as the prototype building for this investigation. Both cyclic and progressive collapse tests are conducted to validate the performance of the proposed structural detailing. Based on the experimental results, detailed finite element (FE) models of the RC frame with different reinforcement layouts are established. The seismic and progressive collapse resistances of different models are compared based on the incremental dynamic analysis (IDA) and nonlinear dynamic alternate path (AP) methods, respectively. The results indicate that the proposed structural detailing can effectively resolve the conflict between the seismic and progressive collapse designs.

Seismic damage mechanism control of rc ductile frames from astiffness point of view

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Seismic Damage Mechanism Control of Rocking Wall-Frame System

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Seismic Fragility Evaluation of Rc Frame Structures Retrofitted with Controlled Concrete Rocking Column and Damping Technique

Passive Control Reinforced Concrete Frame Mechanism with High Strength Reinforcements and Its Potential Benefits Against Earthquakes

Seismic Performance Analysis of RC Frame Rocking-wall Structure System

Application of seismic resilient energy-dissipative rocking columns with HSS tension braces in steel frames

Distribution mode of hysteretic energy and damage mechanism of RC frame-shear-wall structure under strong earthquakes

Experimental Investigation on Reparability of an Infilled Rocking Wall Frame Structure

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

Performance Of Mixed Ordinary AndHigh Strength Steel Reinforced Concrete Frames

Seismic Performance Evaluation of Novel RC Frame Structure with Kinked Rebar Beams and Post-Yield Hardening Columns Through Shaking Table Tests

Experimental studies on a novel structural detailing of RC frames to resist earthquake and progressive collapse

Potential use of rotational metallic dampers for seismic enhancement of infilled RC frames with open first story

Seismic Design Methodology Based on Damage Mechanism Control for Reinforced Concrete Structures

Dynamic Response of Concrete Frames Including Plain Ductile Cementitious Composites

Seismic Performance of Damaged Frame Retrofitted with Self-Centering and Energy-Dissipating Rocking Wall

Research on Earthquake Resistance Behavior of R/C Frame Structures Subjected to Vertical Motion