Abstract:This paper presents an experimental study to evaluate the vertical ground motion effects on steel wide-flange section columns in lower stories of steel frames. Eight full-scale specimens were tested utilizing the Multiple Usage Structural Testing (MUST) equipment, which can properly apply loading in both horizontal and vertical directions. Three cyclic lateral loading tests under constant axial load of 15% to 25% of nominal axial yield capacity were conducted to investigate the basic hysteretic behaviors. Five specimens were tested by pseudo-dynamic hybrid simulation with both horizontal and vertical excitations and an initial gravity load of 15% or 25% axial capacity. The failure mode of specimens tested by cyclic loading was notably influenced by the section compactness. Columns with thinner elements failed due to significant local buckling near the column ends corresponding to a drift ratio of 6% or even larger, while columns with thicker elements suffered rupture in the welding heat affected zones near column ends corresponding to a drift ratio of 4%. During the pseudo-dynamic hybrid loading with ground motions using the records of Imperial Valley earthquake and Northridge earthquake records, no rupture was observed. Lateral hysteretic response fluctuation was clearly observed in the pseudo-dynamic hybrid tests due to the inputs of both horizontal and the vertical ground motions. The pulse-type seismic input caused large residual displacements of the full-scale column specimens. Vertical ground motion also led to significant variations in axial loads, indicating the importance to study the seismic behavior of steel columns under realistic ground motion inputs.

Research on Earthquake Resistance Behavior of R/C Frame Structures Subjected to Vertical Motion

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Full-scale Steel Column Tests under Simulated Horizontal and Vertical Earthquake Loadings

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Fragility Analysis of RC Frame Structures Subjected to Obliquely Incident Seismic Waves

Research on Earthquake Resistance Behavior of a Long-Span and Cantilevered Structure Subjected to Vertical Motion

Research on seismic behavior of mid-highrise RC frame-shear wall structures with special-shaped columns

ANALYSIS OF EARTHQUAKE-RESISTANT BEHAVIORS OF RC COLUMNS UNDER VARIABLE AXIAL LOADS

Elasto-plastic Time History Analysis of a Vertial Hybrid Structure

Elasto-Plastic Seismic Shear Distributions of Frame-Wall Structures

Experimental and Theoretical Research on Mid-Highrise RC Frame with Special-Shaped Columns

Seismic damage mechanism control of rc ductile frames from astiffness point of view

Seismic Performance Analysis of RC Frame Rocking-wall Structure System

Experimental Study on Seismic Behavior of Beijing Goldfield Center Irregular RC Frame Models

Analysis of the damage mechanism of a typical RC frame in Wenchuan Earthquake

Elasto-Plastic Time History Analysis on High-Rise Concrete-Filled Steel Tube(CFST)Frame-RC Core Wall Structure

Experimental Studies on Seismic Performance of Multi-Storey Steel Frame with Eccentric Brace

Discussion on rational model of RC frame structures without basement

Earthquake Response Analysis of Yielding Structures Coupled with Rocking Walls

Application of seismic resilient energy-dissipative rocking columns with HSS tension braces in steel frames

Research on nonlinear time-history response of a multi-tower connected structure subjected to vertical earthquake motion