Abstract:Reinforced concrete (R/C) column memberswith low aspect ratio are adopted in high rise buildings frequently. This kind of member need to resist high axial loading and may suffer cyclic flexure-shear coupling deformation when subjecting severe earthquakes. The performance behavior of the structures with R/C short column is hard to predict. Kinds of analysis methods accounting flexure-axial coupled effects were proposed, however, few simulation model is proposed for R/C short column mainly impact by the flexure-shear coupling in three-dimensional situation. In this paper an improvement of Cyclic Soften Membrane Model (CSMM), basically deduced from Rotational Angle-Soften Truss Model (RA-STM) and Fixed Angle-Soften Truss Model (FA-STM), is proposed. Firstly, the equivalent uniaxial model adopted in CSMM, RA-STM and FA-STM is revised and develop based on Chang and Mander's concrete model to take into pinching effect. Secondly, the iteration algorithm of principle direction determination of strain and stress field is developed, which reduce the unstable and wrong direction phenomenon in Mohr Circle calculation in CSMM and FA-STM. Thirdly, the orthogonal strain directions with opposite sign is treated specially, for the unconditionally unstable caused by concrete constitutive function (one in tension and one in compression, while suddenly stepped into inversed strain status). The model has been implemented into the finite element program, OpenSees. Lateral cyclic static experiments were carried out on two RC short columns. The results deduced from the numerical model is compared with the experiment results, and it shows good agreements for the strength degradation and pinching effect. This result suggest that the FA-STM model provides sufficient accuracy and computational efficiency for nonlinear issues. And further researches will focus on the modification of the membrane material model for shell element and for large deformation issues.

Discussion on rational model of RC frame structures without basement

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Collapse tests of RC frame with sudden middle column removal

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Model Analysis of Steel Frame Structures Considering Interactions between Racks and the Frame

Analytical Study On Buckling Restrained Braced Composite Frames

Analysis of the damage mechanism of a typical RC frame in Wenchuan Earthquake

STUDY ON WEAK BEAM-STRONG COLUMN DESIGN METHOD OF RC FRAME STRUCTURES

Experimental and Theoretical Research on Mid-Highrise RC Frame with Special-Shaped Columns

Experimental Study on Seismic Behavior of Beijing Goldfield Center Irregular RC Frame Models

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

Modification of a macro model for RC structural walls with large openings

Realization of the Global Yield Mechanism of RC Frame Structures by Redesigning the Columns Using Column Tree Method

New Factor to Characterize Mechanism of “strong Column-Weak Beam” of RC Frame Structures

Seismic Analysis Of R/C Short Column Member With Modified Csmm, Fa-Stm And Ra-Stm Theory

Numerical simulation for pseudo-static test of RC frame structure based on the fiber model

THE CONCEPTION OF RC FRAME STRUCTURES WITH A FEW STEEL BRACES

STRONG-COLUMN WEAK-BEAM GLOBAL SEISMIC FAILURE MODE CONTROL-BASED DESIGN OF REINFORCED CONCRETE FRAME STRUCTURES

Progressive Collapse Resistance of RC Frames under a Side Column Removal Scenario: the Mechanism Explained

Testing and Analysis on Progressive Collapse-Resistance Behavior of RC Frame Substructures under a Side Column Removal Scenario

REFINED ASEISMIC ANALYSIS OF LOW-DUCTILITY RC FRAME BUILDING BASED ON NUMERICAL SUBSTRUCTURE METHOD