Abstract:The prefabricated semi-rigid concentrically braced steel frame has always been the main form of residential steel structures, much work so far has focused on the earthquake-resistance performance of such structures. However, little attention has been devoted to systematic model testing, further effort is still required to explore the structural performance with experimental studies. Two semi-rigid concentrically braced steel frames were designed and tested to failure under reversed low-cyclic loading. The hysteretic curves, bearing capacity, energy dissipation capacity, ductility and stiffness degradation performance were studied in detail. Then the performance was compared to analyze the advantages and disadvantages of the two frames. The tests showed that the plastic deformation and damage were primarily concentrated at the braces, and the columns and semi-rigid connections exhibited hardly any plastic deformation. The specimens went through the elastic stage, elastic-plastic stage and failure stage during the tests. The results indicated the specimen with chevron braces has better seismic performance. The structure presents the characteristic of ductile failure on the whole. The steel frame and braces of the specimens cooperatively perform together so that the structure has two seismic fortification lines. The structure with chevron braces possesses an excellent bearing capacity, a high lateral stiffness, a reliable lateral-resistance performance and a strong energy dissipation capacity. In contrast, because of the premature fracture of the cross joints, the structure with X-shaped braces has a lower material utilization efficiency, which leads to a dramatic decrease in the bearing capacity and stiffness, as well as low ductility and a poor energy dissipation capacity.

THE CONCEPTION OF RC FRAME STRUCTURES WITH A FEW STEEL BRACES

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Study on the RC Frame with the Partial Infill Wall in Pushover Analysis

Self-centering Eccentrically Braced Frames Using Shape Memory Alloy Bolts and Post-Tensioned Tendons

Behavior and design of reinforced concrete frames retrofitted with steel bracing against progressive collapse

Experimental studies on a novel structural detailing of RC frames to resist earthquake and progressive collapse

Discussion on rational model of RC frame structures without basement

Cyclic test and finite element analysis of a steel double K-braced frame with laterally-restrained plates for RC building retrofit

Performance Of Mixed Ordinary AndHigh Strength Steel Reinforced Concrete Frames

Experimental study on seismic performance of RC frames reinforced with high-strength steel

Experimental study on the seismic behavior of concentrically braced steel frames with extended end-plate bolted connections

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

Study on the Strengthening Effect of A Typical Rc Frame in Wenchuan Earthquake with Attached Substructures

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

Study on the Effect of Strengthening a Typical RC Frame in Wenchuan Earthquake with BRB Brace

STUDY ON THE COLLAPSE-RESISTANT CAPACITY OF RC FRAMES WITH DIFFERENT SEISMIC FORTIFICATION LEVELS

Passive Control Reinforced Concrete Frame Mechanism with High Strength Reinforcements and Its Potential Benefits Against Earthquakes

Seismic Performance Evaluation of Novel RC Frame Structure with Kinked Rebar Beams and Post-Yield Hardening Columns Through Shaking Table Tests

Experimental Study of a Novel Multi-Hazard Resistant Prefabricated Concrete Frame Structure

Kinked Rebar Configurations for Improving the Progressive Collapse Behaviours of RC Frames under Middle Column Removal Scenarios

Experimental Study of Novel Concrete Frames Considering Earthquake and Progressive Collapse