Abstract:Multi-cellular concrete-filled steel tubular (CFST) columns have been widely used in frame structures for seismic resisting purposes. In this paper, the seismic performance of single-story composite frame structures, consisting of T-shaped multi-cellular CFST (TM-CFST) columns connected with steel beams, was investigated. Four specimens of the composite frame structures under constant vertical compressive loads and quasi-static lateral cyclic loads were tested to explore the hysteretic performance. Refined finite element (FE) models were developed to provide a benchmark modeling approach that was able to accurately capture the mechanical behavior of the composite frame structures. The FE analysis results were compared with those measured from tests, showing satisfactory coincidence between the experimental and simulated results. Hence, the validity of the setup in the FE model was verified. Following the validation of the FE modeling approach, a parametric study was conducted, involving the parameters of axial force ratio, beam-to-column linear stiffness ratio, cross-sectional dimensions of columns and width of frame. On this basis, the seismic performance of the composite frames was investigated by analyzing the characteristics including stiffness, strength, ductility, and energy-dissipating abilities. The TMCFST frames are applicable for low- and medium-rise building structures. In practical designs of the TM-CFST frames, the beam-to-column stiffness ratios should be carefully selected to guarantee that the beam reaches full-sectional plasticity before the column at the beam-column joint, fulfilling the requirement of seismic resistant designs.

Experimental and Theoretical Research on Mid-Highrise RC Frame with Special-Shaped Columns

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Nonlinear Finite-Element Analysis of the Seismic Behavior of RC Column–Steel Beam Connections with Shear Failure Mode

Collapse tests of RC frame with sudden middle column removal

Shaking table test for a mid-highrise big-bay RC frame model with special-shaped columns

Large-Scale Experimental Evaluation of Building System Response to Sudden Column Removal

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Experimental and Numerical Study on the Behavior of Circular RC Columns under Impact Loading

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Discussion on rational model of RC frame structures without basement

Research on seismic behavior of mid-highrise RC frame-shear wall structures with special-shaped columns

Seismic Behaviour Of Concrete-Filled Steel Tubular Frame To Rc Shearing Wall High-Rise Mixed Structures

Experimental Study on Seismic Behavior of Beijing Goldfield Center Irregular RC Frame Models

Research on Earthquake Resistance Behavior of R/C Frame Structures Subjected to Vertical Motion

Experimental and Numerical Study on Seismic Performance of L-shaped Multi-Cellular CFST Frames

Experimental Study and Numerical Model Calibration for Earthquake-Induced Collapse of Rc Frames with Emphasis on Key Columns, Joints, and the Overall Structure

Shaking table test of RC frame-shear wall structure with specially shaped columns

Nonlinear Modeling of the Ten-Story RC Building Structure of 2015 E-Defense Shaking Table Tests