Abstract:Earthquake-induced building collapse and progressive collapse due to accidental local failure of vertical components are the two most common failure modes of reinforced concrete (RC) frame structures. Conventional design methods usually focus on the design requirements of a specific hazard but neglect the interactions between different designs. For example, the progressive collapse design of an RC frame often yields increased reinforcement and flexural strength of the beams. As a result, the seismic design principle of "strong-column-weak-beam" may be violated, which may lead to unfavorable failure modes and weaken the seismic performance. To avoid these adverse effects of the progressive collapse design on the seismic resistance of RC frames, a novel structural detailing is proposed in this study. The proposed detailing technique intends to concurrently improve the seismic and progressive collapse performances of an RC frame by changing the layout of the newly added longitudinal reinforcement against progressive collapse without introducing any additional reinforcement. A six-story RC frame is used as the prototype building for this investigation. Both cyclic and progressive collapse tests are conducted to validate the performance of the proposed structural detailing. Based on the experimental results, detailed finite element (FE) models of the RC frame with different reinforcement layouts are established. The seismic and progressive collapse resistances of different models are compared based on the incremental dynamic analysis (IDA) and nonlinear dynamic alternate path (AP) methods, respectively. The results indicate that the proposed structural detailing can effectively resolve the conflict between the seismic and progressive collapse designs.

Experimental Study and Numerical Model Calibration for Earthquake-Induced Collapse of Rc Frames with Emphasis on Key Columns, Joints, and the Overall Structure

Collapse tests of RC frame with sudden middle column removal

Experimental Study on Progressive Collapse-Resistant Behavior of Reinforced Concrete Frame Structures

Experimental research on a large scale RC frame model subjected to sudden corner column removal

Large-Scale Experimental Evaluation of Building System Response to Sudden Column Removal

Collapse Test of Three-Story Half-Scale Reinforced Concrete Frame Building

Numerical Models to Predict the Collapse Behavior of RC Columns and Frames

NUMERICAL SIMULATION OF FAILURE BEHAVIOR OF REINFORCED CONCRETE FRAME STRUCTURES BY DISCRETE ELEMENT METHOD

Numerical Simulation for the Progressive Collapse of Concrete Building due to Earthquake

Experimental studies on a novel structural detailing of RC frames to resist earthquake and progressive collapse

A novel structural detailing for the improvement of seismic and progressive collapse performances of RC frames

Experimental and modeling study on the progressive collapse resistance of a reinforced concrete frame structure under a middle column removal scenario

Multilinear model for progressive collapse response of reinforced concrete frames under penultimate column removal scenario

Numerical Modelling of the Progressive Collapse of Reinforced Concrete Frames with Different Lateral Restraints

Experimental Study of Novel Concrete Frames Considering Earthquake and Progressive Collapse

A Simplified Method for Quantifying the Progressive Collapse Fragility of Multi-Story RC Frames in China

Experimental and Numerical Investigation on the Dynamic Responses of the Remaining Structure under Impact Loading with Column Being Removed

On the progressive collapse performance of RC frame structures under impact column removal

RESEARCH ON THE INFLUENCE OF SOIL-STRUCTURE INTERACTION ON THE COLLAPSE OF FRAME STRUCTURE

Experimental Studies on Progressive Collapse Behavior of RC Frame Structures: Advances and Future Needs

Dynamic Performance of a Remaining RC Frame with a Central-Column Failure Subjected to Impact Loads