Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental study on seismic behaviors of energy-dissipated braced frame structure with concrete-filled rectangular steel tubular columns and steel beams

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Seismic Behavior of Concrete-Filled Wide Rectangular Steel Tubular (CFWRST) Stub Columns

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Analytical Study On Buckling Restrained Braced Composite Frames

Experimental research on seismic performance of confined concrete filled tubular columns under cyclic loading

Study of energy dissipation mechanism of concrete-filled steel tubular T-joints

Experimental study on seismic behaviors of a new type of frame joint between concrete-filled rectangular steel tubular columns and steel beams

Experimental Studies on Seismic Performance of Multi-Storey Steel Frame with Eccentric Brace

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Test on Seismic Performance of Frame Structure of Steel Reinforced Concrete Beam and Steel-Tube Encased Concrete Column

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Study on energy-based seismic design method of reinforced concrete frame structures

Experimental study on the seismic behavior of concentrically braced steel frames with extended end-plate bolted connections

Experimental research on seismic performance of cold-formed thin-walled steel frames with braced shear panel

Experimental research on seismic behavior of concrete column with spatial steel frame subjected to low cyclic reversed load

Seismic behavior of prefabricated frame with special‐shaped concrete‐filled steel tubular columns and H‐shaped steel beams

STUDIES ON THE ASEISMIC PERFORMANCE OF HIGH RISE STEEL STRUCTURES WITH NEW BEAM-COLUMN JOINTS DISSIPATING SEISMIC ENERGY