Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental study on seismic behaviors of a new type of frame joint between concrete-filled rectangular steel tubular columns and steel beams

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Experimental Study on the Seismic Performance of 3d Joints Between Concrete-Filled Square Steel Tubular Columns and Composite Beams

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental Research on New Type of Concrete-filled Steel Tubular Column Joint to RC Beam

Experimental study on seismic behavior of prefabricated RC frame joints with T-shaped columns

Experimental Research on Seismic Behavior of Concrete Filled Steel Tubular Column Ring Beam Joint Under Cyclic Loading

EXPERIMENTAL RESEARCH AND NONLINEAR FINITE ELEMENT ANALYSIS ON NEW TYPE JOINT BETWEEN COLUMN AND STEEL BEAM OF CONCRETE-FILLED RECTANGULAR STEEL TUBULAR

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Experimental study on seismic behaviors of energy-dissipated braced frame structure with concrete-filled rectangular steel tubular columns and steel beams

An experimental study on the seismic performance of beam-column joints in steel frames with the effect of concrete slabs considered

Experimental study on seismic behavior of laminated steel tube column-concrete beam joint with outer stiffening ring

Experimental research on seismic behavior of concrete column with spatial steel frame subjected to low cyclic reversed load

Experimental Research on Seismic Performance of Rigid Joint Between Steel Beam and Concrete Wall

Experimental study on the seismic behaviour of the connection between concrete-filled twin steel tubes column and steel beam

Seismic performance of joint between steel H‐beam and rectangular concrete‐filled hot‐rolled‐steel tubular column

Experimental Studies on Seismic Behaviors of Connections with Anchorages for Concrete-Filled Square Steel Tubes

Seismic performance of prefabricated high-strength concrete tube column–steel beam joints