Abstract:With the development of large span and heavy load modern engineering, concrete-filled steel tubular truss and laced column structures appear constantly. The joints of these structures are mostly circular Concrete-Filled Steel Tubular (CFST) joints. In order to solve the problem of lacking of the research on the mechanical properties of CFST joints, three CFST T-joints and one Circular Hollow Section (CHS) T-joint which was used for comparing were tested under reversed cyclic axial loading, and three CFST T-joints and one CHS T-joint were tested under reversed cyclic in-plane bending loading. The failure modes and the ultimate load carrying capacities of CFST T-joints were concluded and the load-displacement hysteretic curves were also studied. The test results showed that the failure modes of CFST joints and CHS joints with the same geometry were completely different, the ultimate load carrying capacities of CFST joints were much higher than that of CHS joints, which shows that adopting a concrete-filled chord member is the most effective way to improve the strength of the unstiffened tubular joints when subjected to axial loading and in-plane bending, the energy dissipation mechanisms of CFST joints and CHS joints were completely different, but both CFST joints and CHS joints had excellent seismic performances. The energy analysis of CFST joints under differing loading conditions indicated that there was a significant distinction in terms of the energy dissipation mechanism. The axially loaded specimens dissipated energy mainly by plastic deformation of the brace, while the in-plane bending loaded specimens dissipated energy mainly by punching shear of the chord wall at the intersection area. This research can not only provide scientific basis for the design of CFST joints, but also effectively promote the application of CFST truss and laced column, and can promote the improvement and development of the design theory of concrete-filled steel structures.

Experimental study on seismic behavior of laminated steel tube column-concrete beam joint with outer stiffening ring

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Research and optimization on laminated steel tube column-concrete beam joints with outer stiffening ring

Experimental Study on Reduced I-beam to CFRST Column Joints under Cyclic Loading

Seismic Behavior of an Improved Drilled Flange Connection for I-beam to CFST Column

Experimental Research on Seismic Behavior of Reinforced Concrete Column-to-Steel Beam Joints with Bolted End-plate

Experimental Evaluation of Steel Beam Bolted to Reinforced Concrete Column Connections

Study Of Mechanical Performance Of Concrete-Filled Steel Tubular Joints

Experimental Research on Seismic Behavior of Concrete Filled Steel Tubular Column Ring Beam Joint Under Cyclic Loading

Experimental investigation of concrete-filled steel tubular columns with reinforcing lattice angle

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Seismic performance of a novel concrete-filled steel tube column to continuous reinforced concrete beam joint with multiple openings in the core region

Design and seismic performance analysis of a novel special-shaped steel tube concrete column steel beam joint

Experimental Study on the Seismic Performance of 3d Joints Between Concrete-Filled Square Steel Tubular Columns and Composite Beams

Experimental study on seismic behaviors of a new type of frame joint between concrete-filled rectangular steel tubular columns and steel beams

Seismic Performance of Full-Scale Joints Composed by Concrete-Filled Steel Tube Column and Reinforced Concrete Beam with Steel Plate-Stud Connections

Experimental study on the seismic behaviour of the connection between concrete-filled twin steel tubes column and steel beam

Experimental studies on hysteretic behaviors of steel beam to concrete filled SHS column connections with stiffening ring

An experimental study on the seismic performance of beam-column joints in steel frames with the effect of concrete slabs considered

Seismic Performance of Irregular-Shaped Concrete-Filled Steel Tube Column to H-shaped Steel Beam Joints with Inner Semi-Diaphragm: Experimental and Numerical Study

Experimental Behaviour of Thin-Walled Steel Tube Confined Concrete Column to RC Beam Joints under Cyclic Loading