Abstract:In view of the decreasing trend of column widths in steel residential buildings, a new type of concrete filled rectangular steel tubular column-H-section steel beam connections with external stiffeners is proposed. The diaphragm is removed in this connection. Pseudo-static tests of seven new joint specimens were carried out. The test parameters were the section of the steel beam and the thickness and the height of the long side of the external stiffeners. The failure modes, hysteretic curves, skeleton curves, strength, stiffness degradation, strength degradation, ductility and energy dissipation capacity of the joints were studied. The test results show that there were three failure modes of this new joint, namely, tensile failure of beam flange, weld failure between beam flange and external stiffener, and column wall failure near the external stiffener. The ductility coefficient was 2.17 to 3.67, the equivalent viscous damping coefficient was 0.2 to 0.3, and the average drift ratio was 1/49. The seismic performance of the joint met the requirements of strong joints and weak members. Increasing the thickness or the height of the long side of the external stiffeners can increase the strengths of the joints. The premature cracking of the beam flange, the welding seam between beam flange and external stiffener, or the column wall will reduce the ductility and energy dissipation capacity of the joints. It is proposed that the connection coefficient should be 1.4 when checking the ultimate strength of the column wall and joint weld. The strengthening or weakening measures on the flange at the beam ends can be taken to ensure that the new joints have a sufficient plastic deformation capacity.

Experimental research on seismic behavior of concrete column with spatial steel frame subjected to low cyclic reversed load

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Experimental study on seismic behavior of assembled steel beam-PC column composite frames

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Experimental research on seismic performance of confined concrete filled tubular columns under cyclic loading

Experimental Research on Eccentric Compressive Performance of Steel Tube-Reinforced Concrete Column

Test on Seismic Performance of Frame Structure of Steel Reinforced Concrete Beam and Steel-Tube Encased Concrete Column

Experimental and numerical study on seismic performance of steel reinforced recycled concrete frame structure under low-cyclic reversed loading

Experimental investigation on joints between steel-reinforced concrete T-shaped column and reinforced concrete beam under bidirectional low-cyclic reversed loading

Experimental study on seismic behaviors of a new type of frame joint between concrete-filled rectangular steel tubular columns and steel beams

Experimental study on seismic behaviors of prefabricated embedded concrete-filled steel tube special-shaped column exterior frame

Experimental investigation of concrete-filled steel tubular columns with reinforcing lattice angle

Experimental Research on Seismic Performance of Rigid Joint Between Steel Beam and Concrete Wall

Experimental Study on Seismic Behavior of Concrete Filled Square Steel Tubular Columns to Low-Cycle Reversed Horizontal Load

Experimental study on seismic behaviors of energy-dissipated braced frame structure with concrete-filled rectangular steel tubular columns and steel beams

Experimental study on the seismic performance of a cold-formed thin-walled steel-concrete composite column-H steel beam frame

Mechanical behavior of lattice steel reinforced concrete inner frame with irregular section columns under cyclic reversed loading

Experimental Research on Seismic Behavior of Concrete Filled Steel Tubular Column Ring Beam Joint Under Cyclic Loading

Experimental study on the seismic performance of beam-to-column composite connections in medium-high strength steel frame structures

Experimental Study on Seismic Performance of Assembly Frame Column with Steel Plate Hoop-Welding Bolt Reinforcement Connection

Experimental study on seismic performance of RC frames reinforced with high-strength steel