Abstract:A new adsorbent consisting of fumed, mixed alumina, silica, and titania in various proportions (AST 50) was investigated. The studied material was prepared by chemical vapor deposition method. The diameter of AST 50 primary particles was equal to about 51 nm which denotes that it can be classified as a nanomaterial. In the presented paper, the adsorption properties of polyvinyl alcohol on the ternary oxide were investigated. The polymer macromolecules were characterized by two different molecular weights and degree of hydrolysis. The polymer adsorption reaches the maximum at pH 3 and decreases with the solution pH rise. The reduction of the adsorbed PVA macromolecules is related to the electrostatic repulsion forces occurring in the studied system. The AST 50 point of zero charge (pHpzc) obtained from the potentiometric titration is equal to 4.7. Due to the nonionic character of the analyzed macromolecular compound, the polymer attendance has an insignificant effect on the AST 50 surface charge density. In the case of the adsorbent particles zeta potential, the obtained dependencies are different in the absence and presence of PVA. The shift of the slipping plane and displacement of the counter-ions from Stern layer by the adsorbed polymer chains have the greatest effect on the ζ potential value. The stability measurements indicate that the AST 50 suspensions in the presence of the background electrolyte at pH 3 and 6 are unstable. In turn, in an alkaline medium the mixed oxide suspensions exhibit the highest durability, which is a result of a large number of the negative charges on the AST 50 surface. The addition of PVA 100 significantly improves the suspension stability at pH 3 and 6; at higher pH value, the polymer presence does not influence the system durability. It is related to the steric and electrosteric stabilization of the colloidal particles by the adsorbed polyvinyl alcohol macromolecules.

Polymeric Adsorption Behavior of Nanoparticulate Yttria Stabilized Zirconia and the Deposition of As-Formed Suspensions on Dense Α-Al2o3 Substrates

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

Formation and Rate Processes of Y[sub 2]o[sub 3] Stabilized ZrO[sub 2] Thin Films from Zr(DPM)[sub 4] and Y(DPM)[sub 3] by Cold-Wall Aerosol-Assisted MOCVD

Formation and Rate Processes of Y2o3 Stabilized Zro2 Thin Films from Zr(Dpm)(4) and Y(Dpm)(3) by Cold-Wall Aerosol-Assisted Mocvd

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Dispersion behavior of zirconia nanocrystals and their surface functionalization with vinyl group-containing ligands.

Influence of dispersant contents on rheological behavior of nano-sized tetragonal polycrystals zirconia's suspensions

Spontaneous Adsorption Effect of Graphitic Carbon Nitride Nanosheets to Improve Sintering Behavior of Yttria-stabilized Zirconia Microbeads

Internal Nano Voids in Yttria-Stabilised Zirconia (YSZ) Powder

Sol-Gel Synthesis of Yttria Stabilized Zirconia Membranes Through Controlled Hydrolysis of Zirconium Alkoxide

Highly Reliable Yttria‐stabilized Zirconia Prepared by Direct Coagulation Casting‐high Valence Counter Ions Using Calcium Polyphosphate

In Situ Coagulation of Yttria‐stabilized Zirconia Ceramic with Enhancement of Green Body Via Polyvinyl Pyrrolidone Crosslink

Investigation of the polyvinyl alcohol stabilization mechanism and adsorption properties on the surface of ternary mixed nanooxide AST 50 (Al2O3–SiO2–TiO2)

Efficient Composite Dispersants for High Solid Content, Low Viscosity Nano-Zirconia Slurries: An Experimental and Molecular Dynamics Simulation Study

Preparation of Yttria Stabilized Zirconia Ultrafiltration Membranes with Inorganic Precursors

Rheological properties of nanometer tetragonal polycrystal zirconia slurries for aqueous gel tape casting process

Polymerizing Mechanism and Technical Factors Optimization of Nanometer Tetragonal Polycrystalline Zirconia Slurries for the Aqueous-Gel-tape-casting Process

Study on influence mechanism of surface active agent in preparing nano-sized zirconia powders by super-alkaline coprecipitation method

Ethanol-induced formation of precursor for 8mol% Yttria-stabilized zirconia: Towards the production of well-dispersed, easily sintering, and high-conductivity nano-powders

Deposition and Characterization of YSZ Thin Films by Aerosol-Assisted CVD