Abstract:The aim of the present work was to identify the conditions for the preparation of stable zirconia slurries with high solids content for the production of aqueous gel tape casting objects with improved properties. Influences of the powder and dispersant on the rheological properties were investigated. High stable low-viscosity nanoparticles zirconia suspensions were achieved. Nanometer-sized tetragonal polycrystal zirconia powder was synthesized by a new low-temperature environment-benign method. The oxide powders were confirmed to be 3Y-TZP single phase with tetragonal structure measured by X-ray diffraction analysis. Acryl amide (AM) and N,N′-methylene bisacrylamide (MBAM) have been used as organic monomer and cross-linker of the process, respectively. NH4PAA (M=5000–8000) has been used as polyelectrolyte dispersant. The electrokinetic behavior of nanometer-sized zirconia suspensions stabilized by various dispersant contents was studied. The result indicated the dispersant concentration greatly affected the surface charge of nanometer tetragonal zirconia powder. The isoelectric point (IEP) obviously changed from 8.1 to about 4.7 because of the addition of polyelectrolyte dispersant. To acquire stable low-viscosity slurries, the influences of several parameters on rheological behavior of nanosized tetragonal zirconia suspensions were investigated. It was found that for each factor, there exists an optimum range in which low viscosity was achieved for a slurry with high solid loading. For the slurry of 77 wt.% powder concentration with about 1.0 wt.% polyelectrolyte (based on the powder), the viscosity was 350 mPa s at the shear rate of 110 s−1. The slurry at the optimum conditions met the demands of aqueous gel tape casting process.

Highly Reliable Yttria‐stabilized Zirconia Prepared by Direct Coagulation Casting‐high Valence Counter Ions Using Calcium Polyphosphate

Cubic Yttria Stabilized Zirconia Sintering Additive Impacts: A Comparative Study

Direct Coagulation Casting of Yttria-Stabilized Zirconia Using Magnesium Citrate and Glycerol Diacetate

In-situ Coagulation of Yttria-Stabilized Zirconia Suspension Via Dispersant Hydrolysis Using Sodium Tripolyphosphate

Improved Mechanical Properties of 3YSZ Ceramics Prepared by Pressure-less Sintering Assisted by Cold Sintering under Mild Conditions

In Situ Coagulation of Yttria‐stabilized Zirconia Ceramic with Enhancement of Green Body Via Polyvinyl Pyrrolidone Crosslink

High-strength porous YSZ ceramics fabricated by TBA-based gelcasting with high solid loading slurry

Porous Yttria‐stabilized Zirconia Ceramics Fabricated by Nonaqueous‐Based Gelcasting Process with PMMA Microsphere As Pore‐Forming Agent

Preparation and Performance for Zirconia/Alumina Composite Ceramics

Preparation and properties of yttria-stabilized tetragonal phase zirconia nano-ceramics by high gravity

Porous yttria-stabilized zirconia ceramics with low thermal conductivity via a novel foam-gelcasting method

Preparation of unidirectional porous yttria stabilized zirconia ceramics by an alginate self assemble method

Fabrication of dense YSZ ceramic via vat photopolymerization with low ceramic particles loading

Fabrication, sintering behavior and mechanical properties of calcium oxide doped yttrium oxide refractory via aqueous gel casting method

Influence of Solid Loading in the Gel-Casting Process on the Microstructure and Properties of Porous YSZ Ceramics

Fabrication and Properties of Porous Yttria-Stabilized Zirconia Ceramics

Rheological properties of nanometer tetragonal polycrystal zirconia slurries for aqueous gel tape casting process

Fabrication of highly translucent yttria-stabilized zirconia ceramics using stereolithography-based additive manufacturing

Polymeric Adsorption Behavior of Nanoparticulate Yttria Stabilized Zirconia and the Deposition of As-Formed Suspensions on Dense Α-Al2o3 Substrates

Yttria-stabilized zirconia (8YSZ) synthesis in a supercritical CO 2 -assisted process: a parametric study for achieving cubic phase stability

Reliable High Strength Alumina Fabricated by DCC-HVCI Using Submicron Calcium Citrate Complex