Abstract:Equal channel angular pressing (ECAP) not only affects the mechanical properties of pure copper but also the electrochemical behavior of copper. Thus, it would be interesting to perform a comprehensive analysis from a practical perspective. A three-dimensional (3D) simulation is carried out to reveal the strain distribution and field emission scanning electron microscopy (FESEM) is employed to investigate the microstructural evolution of copper in the course of six ECAP passes. It is found that the ECAP must be repeated enough times to bring about a significant grain refinement. This processing route will lead to observation of an ascending trend in all mechanical properties of copper except total elongation. The dislocation density shows the same ascending trend before it becomes saturated at the sixth pass. In order for copper to regain the usual homogeneity with respect to hardness, six ECAP passes are necessary. On the other hand, potentiodynamic polarization tests and electrochemical impedance spectroscopy (EIS) are all employed to understand the electrochemical behavior of ECAPed copper when immersed in 0.1 M NaOH solution. After the sixth pass, copper shows its best passive and protective behavior in this solution. Furthermore, Mott–Schottky analysis indicates that although the passive film of ECAPed copper still behaves as a p-type semiconductor, it becomes less defective or less conductive as the number of applied ECAP passes increase. Consequently, the most stable passive film forms on a copper sample that has gone through six passes of ECAP.

Analysis of Deformation Textures and Microstructure in ECAE Processed Copper Single Crystals Via Route C

Effect of cryogenic impact deformation and subsequent annealing on microstructure and microhardness of pure copper

EBSD Analysis of Deformed and Partially Recrystallized Microstructures in ECAE-Processed Copper

Experimental and Numerical Investigation of the ECAP Processed Copper: Microstructural Evolution, Crystallographic Texture and Hardness Homogeneity

Microstructure of ECAE-Processed Copper after Long-Term Room-Temperature Storage

Tensile Deformation Behaviors of CuNi Alloy Processed by Equal Channel Angular Pressing

1216 Nano-Scale Strength Analysis by EBSD and AFM Hybrid Method in Ultrafine-Grained Copper Processed by ECAP

Effect of Cerium on Microstructure, Texture and Properties of Ultrahigh-Purity Copper

Influence of Cold Rolling Routes on Mechanical Properties of Copper Subjected to ECAP

Microscopic Analysis by EBSD Method on Fatigue Crack Propagation Behaviour in Ultrafine-Grained Copper

Ebsp Investigation of Microstructure and Texture Evolution During Equal Channel Angular Pressing of Aluminium

Effect of grain refinement on mechanical and electrochemical properties of severely deformed pure copper through equal channel angular pressing

Mechanical response and texture evolution prediction of AZ31 magnesium alloy during CVCDE process using crystal plasticity finite element method

Severe plastic deformation of commercially pure aluminum using novel equal channel angular expansion extrusion with spherical cavity

Microstructure, texture and mechanical properties of pure copper processed by ECAP and subsequent cold rolling

ACOM/TEM and EBSD Microstructure Characterization of ECAE-Processed Zirconium

Microstructure Evolution in High Purity Aluminum Single Crystal Processed by Equal Channel Angular Pressing (ECAP)

Effect of ECAP by Route BC and Aging Heat Treatment on the Structure and Properties of Cu0.4Cr0.3Zr Alloy

Microstructure and Texture Evolution of AZ31 Alloy Prepared by Cyclic Expansion Extrusion with Asymmetrical Extrusion Cavity at Different Temperatures

Effect of original microstructure on microstructure and properties of pure copper subjected to equal channel angular pressing(ECAP)

Mechanical responses, texture and microstructural evolution of high purity aluminum deformed by equal channel angular pressing