Abstract:The process parameters in the low-pressure casting of large-size aluminum alloy wheels are systematically optimized in this work using numerical casting simulation, response surface methodology (RSM), and genetic algorithm (NSGA-II). A nonlinear input–output relationship was established based on the Box–Behnken experimental design (BBD) for the crucial casting parameters (pouring temperature, mold temperature, holding pressure, holding time), and response indicators (defect volume fraction, spokes large plane mean secondary dendrite spacing (SDAS)), and a mathematical model was developed by regression analysis. The Isight 2017 Design Gateway and NSGA-II algorithm were used to increase the population and look for the best overall solution for the casting parameters. The significance and predictive power of the model were assessed using ANOVA. Casting numerical simulation was used to confirm the best option. To accomplish systematic optimization in its low-pressure casting process, the mold cooling process parameters were adjusted following the local solidification rate. The results showed that the mathematical model was reliable. The optimal solutions were a pouring temperature of 703 °C, mold temperature of 409 °C, holding pressure of 1086 mb, and holding time of 249 s. The mold cooling process was further optimized, and the sequence solidification of the optimal solution was realized under the optimized cooling process. Finally, the wheel hub was manufactured on a trial basis. The X-ray detection, mechanical property analysis, and metallographic observation showed that the wheel hub had no X-ray defects and its mechanical properties were well strengthened. The effectiveness of the system optimization process scheme was verified.

Simulation of Casting Stress of Low-pressure Casting Aluminum Alloy Wheel

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Die Structure Optimization of Aluminum Alloy Wheel Low-Pressure Die Casting Based on CAE

Process Optimization of Low-pressure Die Casting of Aluminum Alloy Wheel based on Taguchi Method

Prediction of Fatigue Life for Automotive A-Alloy Wheel with Integrated Cast Defects

Solidification simulation of automobile wheel in low pressure casting

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

ALUMINUM ALLOY WHEEL BENDING TEST FATIGUE LIFE PREDICTION

Study of Mold Filling Simulation on Low Pressure Die Casting for Automobile Wheel Casting

Numerical Simulation of Filling Process and Technology Improvement of Low Pressure Die Casting of Aluminum Wheel Hub

Numerical simulation analysis of thermal stress fields during solidification of steel casting

Study on Numerical Simulation of Mold Filling and Solidification Processes under Pressure Conditions

Prediction method of shrinkage cavity and shrinkage porosity in solidification process under low-pressure casting

Multi-Objective Optimization of The Low-Pressure Casting of Large-Size Aluminum Alloy Wheels through a Systematic Optimization Idea

Stress and Distortion Simulation of Magnesium Alloy Die Casting Dies

Low pressure casting technology and forming process analysis of metal mold based on ProCAST FEA procedure

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Simulation Analysis on Micro Hole Forming of Aluminum Alloy in Extrusion Casting Process

Numerical Simulation of Stress of Adjustment Sheet During Investment Casting Process

Numerical simulation of fluid flow and free surface fluctuations during wheel and belt casting process

Key Analysis of Design and Numerical Simulation for Aluminum Alloy Impeller Low-pressure Casting Mold